Bedienungsanleitung Canon VB-H610VE (Seite 53 von 178) (Englisch)

683281

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

[Camera] Setting Initial Camera Settings and External Device Name

Setting Page

Camera Control

(1) [Digital Zoom]

Set digital zoom to [Disable] or [Enable].

The higher the digital zoom ratio, the lower the image

quality becomes.

(2) [Image Stabilizer]

Select [Disable], [On1] or [On2] for image stabilizer.

Image stabilizer has the effect of correcting blurry

images. Try [On2] if the image is still blurry after

selecting [On1].

If you have selected [On1] or [On2] as the image

stabilizer setting, the viewing angle will be smaller and

the image more coarse than when [Disable] is

selected. This is not a malfunction.

(3) [AGC Limit]

Select one of 5 levels from 1 to 5 to automatically set

the upper gain limit. The greater the value, the higher

the sensitivity becomes. If you do not want to use the

automatic gain adjustment, select [OFF]. Setting the

[AGC Limit] allows you to record with reduced noise

when recording in low light conditions.

Day/Night

(1) [Mode]

Set Day/Night mode to [Manual] or [Auto].

It is also possible to switch between [Day Mode] and

[Night Mode] using Admin Viewer Night Mode

function (p. 141).

If you have selected [Auto], set [Switching Brightness]

and [Response (sec.)] according to the environment

in which the camera is installed as well as the desired

switching conditions.

(2) [Switching Brightness]

Set the brightness at which Day Mode and Night

Mode will be switched when [Auto] is selected in

[Mode]. Select [Darker], [Slightly Darker], [Standard],

[Slightly Brighter] or [Brighter]. Select [Darker] if you

want to capture video in color as much as possible.

Select [Brighter] to reduce noise. Note that this mode

switches to black & white sooner.

(3) [Response (sec.)]

Set the time in seconds needed for judgment on

switching between Day Mode and Night Mode when

[Auto] is selected in [Mode]. Select [60], [30], [20],

[10] or [5].

The mode will switch between Day Mode and Night

Mode if brightness remains above or below the level

set in (2) for the number of seconds specified.

Select [30] or [60] if brightness changes frequently,

such as when a light source passes in front of the

camera. Select [5] or [10] if change in brightness is

minimal.

Degree of

blurriness

corrected

Viewing angle

ratio

Effective

pixels

Disable — 100%

Approx. 2.07

megapixels

On1 Small 83%

Approx. 1.44

megapixels

On2 Large 50%

Approx. 0.52

megapixels

Important

• If [On2] is selected, it is best to select a video size smaller

than “960 x 540”.

• The image stabilizer is not effective when the subject is

shaking.

• The image stabilizer is not effective beyond a certain level of

vibration or against momentary vibration.

• See “Important” on p. 94, p. 100 for precautionary notes

regarding Admin Tools configuration when image stabilizer is

set.

• See “Important” on p. 136 for precautionary notes regarding

the Viewer when image stabilizer is set.

• [AGC Limit] is disabled when [Exposure] is set to [Manual] or

[Auto (Flickerless)] in the Admin Viewer.

• Minimum subject illumination may change when [AGC Limit]

is set.

Important

• If [Auto] is selected for [Day/Night], conduct a thorough

operation test to check the effectiveness of the setting

beforehand.

• If [Auto] is selected for [Day/Night], set [Exposure] of the

Admin Viewer to [Auto], [Auto (Flickerless)] or [Auto (Shutter-

priority AE)] (p. 140).

• To use with infrared illumination, set [Day/Night] to [Manual].

• When Day/Night Mode is set to [Manual], in additional to the

Day/Night function of the Admin Viewer (p. 141), it is also

possible to switch Day/Night Mode via settings in [Setting

Page] > [Event] > [External Device Input] (p. 65) or [Event] >

[Timer] (p. 66).

• When [Day Mode] and [Night Mode] are switched, the image

may not focus correctly depending on the brightness.

• If [Day/Night] is set to [Auto], the infrared cutoff filter may

move several times while the mode is switching between

[Day Mode] and [Night Mode]. Pan, tilt, zoom and manual

focus will not work during this period.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-H610VE Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-H610VE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info