683313
149
Zoom out
Zoom in
Vorherige Seite
1/258
Nächste Seite
Setting Page
5
133
The privacy mask area is saved to the camera.
Saved privacy mask areas are shown in the video display area and the privacy mask registration area.
Changing/Deleting a Privacy Mask
Privacy Mask Registration Area
This shows the positions of privacy mask areas in the entire area that can be captured by the camera.
(1) Entire Area That Camera Can Capture
This shows the area that can physically be captured.
If a panorama image is registered in the camera, the panorama image is displayed here.
(2) View Restriction Area
Appears in gray if view restrictions have been configured (P. 114).
(3) Privacy Mask Areas
Privacy mask areas with [Mask area] set to [Enable] (P. 132) are filled in.
Privacy mask areas with [Mask area] set to [Disable] (P. 132) have diagonal lines displayed in them.
(4) Preview Frame
Indicates the current position of the camera shown in the video display area.
Changing Mask Position and Size
How to Select a Privacy Mask
The following methods are available for selecting the privacy mask area.
Click the privacy mask area you want to change in the privacy mask registration area.
Click [Preview] in the mask area you want to display.
Click the privacy mark area shown in the video display area.
7
Click [Apply].
Important
Check privacy mask settings again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings.
You will need to set the position of the privacy mask again if you change the [Video Flip] setting in [Camera] > [Camera] >
[Installation Conditions].
If you reconfigure privacy mask settings after you changed the [Camera] > [Camera] > [Camera Control] > [Image Stabilizer],
reconfigure all privacy mask positions and sizes.
If you change the privacy mask settings after saving a panorama image using the panorama function, you must use the
panorama function to recreate the panorama image (P. 110).
After registering a privacy mask, pan, tilt and zoom the camera to confirm the areas you want to mask do not become visible
when the camera angle is altered.
Privacy masks may deviate slightly from the specified position depending on the zoom position.
HM4x
HM4x
S30 S31
(1)(1)
HM4x
S30
S31
H730
S80x
S90x
(4)
(3)
(2)
(3)
HM4x
S30
S31
HM4x
S30 S31
HM4x
S30
S31
149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon VB-H651VE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info