683313
151
Zoom out
Zoom in
Vorherige Seite
1/258
Nächste Seite
Setting Page
5
135
Settings for audio input from the microphone connected to the camera and audio output from the Viewer. The output sound
clip used when an event is triggered can also be registered.
[Audio Server] is the same as [Server] > [Audio Server]. Settings configured on one [Audio Server] page are also reflected
on the other.
General Audio
Set the audio input/output volume and microphone type.
[Audio Input]
Select whether to use audio input from the microphone. If you select [Enable], you can use functions related to audio input
such as [Audio Server] > [Audio Transmission from the Camera] (P. 136) or [Event] > [Audio Detection] > [Volume
Detection Event] (P. 152).
If you select [Disable] and click [Apply], the following settings are locked and audio input functions are disabled.
[Audio Server] > [Audio Transmission from the Camera] > [Disable]
[Server] > [RTP Server] > [RTP Stream 1] – [RTP Stream 5] > [Audio Transmission] > [Disable]
[Event] > [Audio Detection] > [Volume Detection] > [Volume Detection Event] > [Disable]
[Event] > [Audio Detection] > [Scream Detection] > [Scream Detection Event] > [Disable]
[Video and Audio] > [Audio]
Setting Audio Input/Output
Important
Video and audio can be distributed to up to 30 clients. However, when there are many clients or they are connected to the camera over
an SSL/TLS connection, the video frame rate may slow down and the sound may drop out if audio reception from the camera is
enabled.
The video and audio may not be synchronized.
If the [Input Volume] or [Echo Canceller] ( only) setting is changed after setting volume detection (P. 152) or scream detection
(P. 153), check the detection setting again.
The audio may be temporarily interrupted, depending on the performance of the computer and the network environment.
The audio may be interrupted if anti-virus software is enabled.
Communication may be temporarily interrupted, cutting off the audio, if the LAN cable is unplugged and plugged in again. If this
occurs, reconnect from the Viewer.
The volume, sound quality, etc., may change depending on the characteristics of the microphone used.
Use a speaker with an amplifier to connect to the camera (please refer to “Installation Guide”).
The following settings can be configured here.
General Audio
•Audio Server
Sound Clip Upload 1 to 3
H730
HM4x
H730
151

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon VB-H651VE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info