Bedienungsanleitung Canon VB-S30D (Seite 42 von 185) (Englisch)

630614

Zoom out

Zoom in

Vorherige Seite

1/185

Nächste Seite

To set [Use DHCPv6], select [Enable] in [IPv6], then

select [Enable] in [Auto (DHCPv6)].

(3) [Name Server Address (DHCP)]

Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto-

Setting of Name Server Address] to display the name

server address acquired from the DHCP server.

(4) [Name Server Address (DHCPv6)]

Select [Use DHCPv6] or [Use DHCP/DHCPv6] in [Auto-

Setting of Name Server Address] to display the name

server address acquired from the DHCPv6 server.

(5) [Host Name]

You can register the host name of the camera in the

name server.

Characters A to Z, a to z, 0 to 9, “-” (hyphen), “_”

(underscore) and “.” (period) may be used up to 63

(single-byte) characters in length.

(6) [Host Name Registration with DDNS]

Select [Enable] to register the entered name server

address and host name of the camera.

(7) [Search Domain]

Specify the host name, without specifying a domain

name, for a server, such as the upload server, to search

domains in the form “host name + domain name”,

where the domain names are specified in the server

domain list. Enter a domain name and click [Add] to

add the domain name to the search domain list.

(8) [Search Domain List]

A list of domain names added using [Search Domain]

appears. The function queries DNS server for each

domain name starting from the top of the list.

Use the ▲▼ buttons on the right to change the order

of the domain names.

To delete a domain name, select one from the list and

then click [Delete].

Note

• Use [Host Name Registration with DDNS] if the camera IP

Address Setting Method is [Auto (DHCP)] (p. 40). DNS server

registration settings must be set in advance. Contact your

System Administrator for the DNS server settings.

• If the name server address 1 is unavailable, the name server

address 2 will be accessed. However, the name server

address 2 must be set in advance.

mDNS

(1) [Use mDNS]

Set mDNS to [Disable] or [Enable]. If you use mDNS,

the IP address and host name of the camera will be

broadcast to other hosts on the network.

SNMP

(1) [Use SNMP v1 and v2c]

Set SNMPv1, v2c use to [Disable] or [Enable].

Camera information can be referenced by the SNMP

Manager if [Enable] is specified and SNMPv1 or v2c

is used.

(2) [Use SNMP v3]

Set SNMPv3 to [Disable] or [Enable]. Camera

information can be referenced by the SNMP Manager

if [Enable] is specified and SNMPv3 is used.

(3) [Administrator Contact Information]

Set contact information (e-mail address, etc.) for the

Administrator of the camera. Setting information can

be referenced by the SNMP manager.

(4) [Administration Function Name]

Set the camera name used for administration. Setting

information can be referenced by the SNMP manager.

If left blank, the following will be used by default:

VB-S30D

VB-S31D

VB-S800D or VB-S805D

VB-S900F or VB-S905F

(5) [Installation Location]

Set information regarding the installation location of

this camera. Setting information can be referenced by

the SNMP manager.

SNMP v1 and v2c Server

(1) [Community Name]

When [Enable] is selected in [SNMPv1, v2c], enter a

community name to be used for SNMPv1 and v2c.

The default setting is blank.

Important

Do not use “_” (underscore) in [Host Name] and [Search

Domain] in Internet Explorer 8/9/10/11.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-S30D Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-S30D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info