Bedienungsanleitung Canon VB-S30D (Seite 62 von 185) (Englisch)

630614

Zoom out

Zoom in

Vorherige Seite

1/185

Nächste Seite

open, and an inactive event occurs when the

terminals close.

(3) [Active Event Operation]

Select the operation to be performed upon an active

event. If [Enable] is selected, (6) [Preset], (7) [Video

Record] and (8) [E-mail Notification] will be executed

according to their settings upon an active event.

(4) [Inactive Event Operation]

Select the operation to be performed upon an inactive

event. If [Enable] is selected, (6) [Preset], (7) [Video

Record] and (8) [E-mail Notification] will be executed

according to their settings upon an inactive event.

(5) [Ongoing Active Event Operation]

Select the operation to be performed while an active

event is in progress. This can only be set when [Active

Event Operation] is set to [Enable].

If [Enable] is selected, (7) [Video Record] and (8) [E-

mail Notification] will be executed according to their

settings during the active event.

(6) [Preset]

If a preset is specified, the camera will automatically

orient to the specified preset position when an

external device input event occurs. To use presets, it

is necessary to set presets with the Preset Setting Tool

under Admin Tools (p. 96). If there is no need for

additional camera operation, select [None].

(7) [Video Record]

Specify the video record action. If [Enable] is

selected, video will be transmitted to the destination

selected in [Video Record Action] (p. 60) when an

external device input event occurs.

(8) [E-mail Notification]

Select the e-mail notification operation to be

performed. If [Enable] is selected, e-mail

notification will be performed when an external

device input event occurs. To use this function,

[Upload] > [E-mail Notification] must also be set

(p. 57).

(9) [External Device Output for Active Event]

Select whether external device output is active or

inactive upon an active event. Select [Disable] to

disable external device output.

(10)[External Device Output for Inactive Event]

Select whether external device output is active or

inactive upon an inactive event. Select [Disable] to

disable external device output.

(11)[Day/Night Mode Switching]

Select the Day/Night Mode switching behavior when

an external device input event is triggered.

When [Switch to Day Mode] is selected, switches to

Day Mode when an active event is triggered, and

switches to Night Mode when an inactive event is

triggered.

When [Switch to Night Mode] is selected, switches to

Night Mode when an active event is triggered, and

switches to Day Mode when an inactive event is

triggered.

Select [Disable] to disable Day/Night Mode switching.

Timer

(1) [Timer Event]

Select [Disable] or [Enable] for timer event.

(2) [Start Time]

Set the start time of the timer event in 24-hour format.

(3) [End Time]

Set the end time of the timer event in the 24-hour

format.

(4) [Repeat Interval]

Select [1 sec.] [5 sec.] [10 sec.] [30 sec.] [1 min.] [5 min.]

[10 min.] [15 min.] [20 min.] [30 min.] [1 hour] [3 hours]

[6 hours] or [12 hours] for the timer event repeat intervals.

Select [None] if an operation need not be repeated.

(5) [Video Record]

Specify the video record action. When [Enable] is

selected, video will be transmitted to the destination

selected in [Video Record Action] (p. 60) when a timer

event occurs.

(6) [E-mail Notification]

Select the e-mail notification operation to be

performed. If [Enable] is selected, e-mail notification

is performed when a timer event occurs. To use this

function, [Upload] > [E-mail Notification] must also be

set (p. 57).

(7) [External Device Output]

Select whether external device output is active or

inactive when a timer event occurs. Select [Disable] to

disable output to an external device.

Important

• When [Day/Night] in the Admin Viewer is set to [Auto], Day/

Night Mode switching will not happen when an external

device input event is triggered (p. 144).

• Camera control privileges are released if any of the following

actions occur while the Admin Viewer/VB Viewer has camera

control privileges.

– If the camera angle is moved according to

the [Preset] settings

– If the Day/Night Mode is switched using [Day/Night Mode

Switching].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-S30D Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-S30D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info