Bedienungsanleitung Canon VB-S30D (Seite 111 von 185) (Englisch)

630614

111

Zoom out

Zoom in

Vorherige Seite

1/185

Nächste Seite

Intelligent Function Setting Tool

111

Admin Tools

Note

• Drag the square marks (■) at each angle to change the shape

of the polygon.

• Click [Clear] to delete the polygonal detection area.

• The camera tampering detection area cannot be changed.

Changing a [Rectangular] detection area into a [Polygonal]

shape or changing a [Polygonal] detection area into a

[Rectangular] shape

Changing the shape of the detection areas already set

deletes that area and switches to a new drawing setting.

 Setting the Detection Line

Use the video display area to set the detection line.

Specify a detection line consisting of a polygonal line with

a maximum of 32 angles.

In the video display area, click the start point of the

detection line and then click the end point. To create a

detection line consisting of polygonal line, click each

angle in the polygonal line in order.

To confirm a detection line, click any of the already set

angles.

The angles in a confirmed detection line can be dragged

to change the shape of a detection line and lines between

angles can be dragged to change the position of the

detection line.

Note

• Drag the square marks (■) at each angle to change the shape

of the detection line.

• Click [Clear detection line] to delete a detection line.

 Setting Detection Criteria per Detection Type

Specify different detection criteria for each detection type.

Detect criteria for [Moving Object Detection]

Set detection areas where you want to detect moving

objects.

For [Object Size (%)], enter a value or move the slider to

set the ratio of the size of an object moving in the

detection area to the size of the detection area.

When the ratio of an area where the camera has detected

a moving object exceeds the value set for [Object Size

(%)], detected mode is triggered to ON.

When [Object Size (%)] is changed, an indicator frame

showing the size of the object is displayed for 1 second in

the center of the video display area, allowing specification

of the settings while checking the size ratio.

Any moving objects detected are shown with contour lines.

If a moving object is smaller than [Object Size (%)], its

contour lines are white. If the moving object is larger than

[Object Size (%)], its contour lines take on the same color

as the detection area, indicating that “detection” mode has

been triggered to ON.

Note

If an object is placed in or removed from the moving object

detection area, “detected” mode will be triggered for Moving

Object Detection.

Detect criteria for [Abandoned Object Detection]

Set areas where you want to detect abandoned objects as

detection areas.

Click [Restart intelligent function] again.

Configured detection

area

Object size indicator

Detection area

Contour lines of a

detected moving

object

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-S30D Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-S30D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info