Bedienungsanleitung Canon VB-S30D (Seite 112 von 185) (Englisch)

630614

112

Zoom out

Zoom in

Vorherige Seite

1/185

Nächste Seite

112

[Object Size (%)]

Enter a value or move the slider to set the ratio of the size

of an object that was left behind in the detection area to

the size of the detection area.

When [Object Size (%)] is changed, an indicator frame

representing the area of the object is displayed for 1

second in the center of the video display area. This allows

you to check the size ratio of the abandoned object

detection area while specifying the [Object Size (%)]

setting.

[Duration (Sec)]

Set the time that must elapse after an object has been left.

If both the values for [Object Size (%)] and [Duration

(Sec)] are exceeded, detection mode is triggered to ON.

Any moving objects detected are shown with contour lines.

If [Object Size (%)] and [Duration (Sec)] are not exceeded,

contour lines are white. When all detection criteria are met,

contour lines take on the same color as the detection area

and “detected” mode is triggered to ON.

Detect criteria for [Removed Object Detection]

Set detection areas for objects whose removal you want to

detect. If there are multiple objects for which you want to

enable detection, be sure to configure Removed Object

Detection for each object.

For [Duration (Sec)], set the time that must elapse after

the object has been taken away. Detected mode will be

triggered to ON when an object is taken away from the

detection area for a period longer than the set [Duration

(Sec)].

Any moving objects detected are shown with contour

lines. As long as [Duration (Sec)] has not elapsed,

contour lines are white. When [Duration (Sec)] has

elapsed, contour lines take on the same color as the

detection area, indicating that “detected” mode has been

triggered to ON.

Detect criteria for [Camera Tampering Detection]

For [Camera Tampering Detection], the entire video

display area becomes the detection area. Detected mode

will be triggered to ON when the video changes over an

area exceeding the ratio set in [Change Ratio (%)].

When [Change Ratio (%)] is changed, an indicator frame

representing the percentage of the entire video display

area is displayed for 1 second in the center of the area,

allowing you to check while specifying the setting.

Object size indicator

Detection area

Contour of abandoned

object

Important

Set detection areas for removed object detection so that they

precisely match the contours of the object in question.

Influence from the target object’s shadow or adjacent objects

may result in the target object being recognized as larger than

actual and will not trigger Removed Object Detection. In such

cases, reconfigure the detection area to outline the recognized

target object. Alternatively, use [Quick setting] (p. 110).

Removed object

detected

Contour of removed

object

Change ratio indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon VB-S30D Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon VB-S30D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info