Bedienungsanleitung Canon XF200 (Seite 129 von 246) (Englisch)

615742

129

Zoom out

Zoom in

Vorherige Seite

1/246

Nächste Seite

129

Assignable Buttons

* This function can be used only by assigning it to an assignable button.

** This function can only be assigned to assignable buttons 1 to 4.

[Tele-converter]

Activates the digital tele-converter in the following sequence:

1.5x J 3x J 6x J Off

Ü – 74

[Wide-End Angle] Toggles the angle of view at wide-angle end between [Normal] and [Wider]. Ü – 74

[Gain Mode] Toggles the gain mode between [Automatic] and [Manual]. Ü – 62

[Shutter Mode] Toggles the shutter speed mode between [Automatic] and [Manual]. Ü –

[Shutter Increment] Changes the shutter speed increment between [Normal] and [Fine]. Ü –

[WB Mode]

Toggles the white balance mode between automatic white balance (AWB) and

the current position of the WHITE BAL. switch.

Ü – 69

[PEAKING] Turns peaking on/off. Ü – 84

[ZEBRA] Turns zebra patterns on/off. Ü – 89

[WFM]

Activates video scopes in the following sequence:

Waveform monitor J Vectorscope J Edge monitor ( mode only) J Off

Ü Ü 106

[MAGN.] Turns magnification on/off. Ü – 84

[TL-H58] Sets the [~ Camera Setup] > [Conversion Lens] setting to [TL-H58] or [Off]. Ü –

[WA-H58] Sets the [~ Camera Setup] > [Conversion Lens] setting to [WA-H58] or [Off]. Ü –

[Color Bars] Turns color bars on/off. Ü – 105

[Infrared Monochrome] Switches between white and green when the camcorder is in infrared mode. Ü – 124

[Infrared Light]

Turns the infrared light on/off when [~ Camera Setup] > [Infrared] >

[Light] is set to [Toggle].

Ü – 124

[Markers] Turns onscreen markers on/off. Ü – 88

[OLED Setup] Opens the [OLED Setup] submenu. Ü Ü 34

[Viewfinder Setup] Opens the [Viewfinder Setup] submenu. Ü Ü 34

[OLED/VF B&W] Turns the B&W mode of the OLED screen and viewfinder on/off. Ü Ü 35

[Onscreen Display]

Turns on/off the inclusion of onscreen displays on video output from the

camcorder’s terminals (both HD and SD video output).

Ü Ü 163

[MP4 Start/Stop]** Starts or stops recording an MP4 clip. Ü – 121

[MP4 FTP Transfer]* Adds the MP4 clip that was just recorded to the FTP transfer queue. Ü – 189

[Add Shot Mark 1] Adds an " mark to the clip. Ü Ü

108

[Add Shot Mark 2]* Adds an # mark to the clip. Ü Ü

[Add $ Mark] Adds an $ mark to the clip. Ü Ü

150

[Add % Mark] Adds a % mark to the clip. Ü Ü

[Time Code] Displays the [Time Code] submenu. Ü – 90

[Time Code Hold]* Puts the time code display on hold or resumes it. Ü Ü 91

[HEADPHONE +] Increases the headphone volume. Ü Ü

147

[HEADPHONE -] Reduces the headphone volume. Ü Ü

[Monitor Channels] Switches the audio output channel. Ü Ü 164

[Audio Level] Turns the audio level meter on/off. Ü Ü

103,

104

[Wireless Controller]

Turns the supplied wireless controller on/off. Ü Ü 44

[Photo]* Records a photo. Ü Ü 197

[Status]* Displays the status screens. Ü Ü 211

[My Menu] Opens the [My Menu] customized submenu. Ü – 30

[Initialize Media] Opens the [Initialize Media] submenu. Ü Ü 41

[User Setting]*

Customizable slot. Assign to the button any menu setting you would like to

Ü Ü –

Function name Description A

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XF200 Seite 129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XF200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info