Bedienungsanleitung Canon XF200 (Seite 130 von 246) (Englisch)

615742

130

Zoom out

Zoom in

Vorherige Seite

1/246

Nächste Seite

Custom Picture Settings

130

Custom Picture Settings

You can preset a number of picture-related settings (A 133). After changing individual settings to your

preference, you can save the whole set in the camcorder or on an SD card as a custom picture file. You can then

load the file at a later date to change the current settings to the preset levels you selected. You can even add

custom picture settings to MXF clips recorded on a CF card.

You can save up to 9 different custom picture files on the camcorder and up to 20 custom picture files on an SD

card. Custom picture files can be copied between the camcorder and SD card.

Custom picture files created with this camcorder are compatible only with other XF200 / XF205 camcorders.

Selecting Custom Picture Files

Select a custom picture file to easily apply its settings to your recordings

or to edit, rename, protect, or transfer it.

1 Open the [Custom Picture] submenu.

[~ Camera Setup] > [Custom Picture]

2 Select [- / Select File] and then press SET.

• The default custom picture file is [Off]. A list of custom picture files in

the camcorder and SD card appears. Files in the camcorder begin

with [C1] to [C9]; those on the SD card begin with [SD1] to [SD20].

3 Select the desired file and then press SET.

• Select [Off] to record without applying any custom picture settings.

• To apply the custom picture settings of the selected file, continue to step 4. To perform other operations on

the selected file (edit settings, copy, protect, etc.), continue instead with the one of the procedures in the

following pages.

4 Press the MENU button to exit the menu.

• The selected custom picture file’s settings will be applied. / (camcorder) or . (SD card) and the custom

picture file’s number will appear on the left of the screen.

NOTES

• About changing custom picture related settings using the optional RC-V100 Remote Controller

- When the remote controller is connected to the camcorder, you can press the remote controller's CUSTOM

PICT. button to open/close the [Custom Picture] submenu.

- If a protected custom picture file or no custom picture file is selected on the camcorder ([-

/ Select File]

is set to [Off]), custom picture related settings cannot be changed using the remote controller.

- While the remote controller is connected to the camcorder, custom picture files on the SD card ([SD1] to

[SD20]) cannot be used. If you connect the remote controller while a custom picture file on the SD card was

selected, the custom picture file will change automatically to [Off] (recording without custom picture

settings). To use the settings of a custom picture file saved on the SD card, copy the file in advance from the

SD card to an open file slot in the camcorder (A 132).

Operating modes:

[~ Camera Setup]

[Custom Picture]

[- / Select File]

[Off]

Preset Custom Picture Files

By default, custom picture files [C8] and [C9] in the camcorder are protected. Remove the protection

(A 131) to edit the file.

[C8: S/N Pri.]: Preset settings that give priority to the image’s signal-to-noise (S/N) ratio.

[C9: Wide DR]: Applies a gamma curve with a very wide dynamic range and an appropriate color matrix.

COPY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon XF200 Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon XF200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info