737735
50
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
Operation
Technical and visual modifications as well as misprints reserved - © 2019 by ERGO-FIT GmbH & Co. KG
7.1.4 External Connection
A serial interface (RS232) is standard equipment on the XRCISE STRESS ECHO MED.
Please note! Some ECG devices cannot be connected with the XRCISE STRESS ECHO
MED. Call +49 (6331) 246187 for more information.
Control of the ergometer by external devices:
For control by external devices (ECG, PC, etc.), the corresponding data protocol must be
selected first. The data protocol is set by the installer. If the initialisation is received through
the interface, the XRCISE STRESS ECHO MED automatically changes to the operating
mode „external control“ („ECG no.“ and the protocol number will be shown in the middle of
the display). It is not necessary to select the menu item. In addition, the recognised control
characters will be displayed for checking purposes. Unknown commands will be shown as „
/ „. Printing is not supported during external control.
If disturbances occur between the ECG device and the bike ergometer, potential compensation
can be installed (see Chapter 5.4).
Data protocols:
Use the interface cable to connect the XRCISE STRESS ECHO MED with the external
device (ECG, PC etc.). Then the correct data protocol needs to be set:
1. You are in the main menu. Access the service menu by pressing the PLUS and
MINUS keys at the same time. Select the „RS232 Interface“ function.
3. Use the PLUS/MINUS keys to select the desired protocol (00, 01, 02,...) and confirm
your selection with the START key. The protocol selection is saved for further use.
Use the STOP key to return to the main menu at any time.
If the initialisation is received through the interface, the XRCISE STRESS ECHO MED
automatically changes to the operating mode „external control”. In addition, the recognised
control characters will be displayed for checking purposes. Unknown commands will be
shown as „ / „. Printing is not supported during external control.
44
50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cardiowise XRCISE Stress Echo Med wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cardiowise XRCISE Stress Echo Med

Cardiowise XRCISE Stress Echo Med Bedienungsanleitung - Deutsch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info