Bedienungsanleitung Cardo Scala rider G4 (Seite 9 von 27) (Englisch)

480782

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

English

6.1 MOBILE PHONE

To use your mobile phone with the scala rider G4, you must

rst pair the G4 to your mobile phone.

Pairing is a one-time process. Once the G4 is paired to a

specic mobile phone, they will remain paired and automatically

recognize each other whenever they are within range.

If the connection between the phone and G4 is lost, tap the Mobile

Button on your G4 to reconnect the devices.

PAIRING THE G4 TO A BLUETOOTH MOBILE PHONE:

1. Turn on your phone and make sure its Bluetooth function is activated.

Turn on your G4 by pressing the Mobile Button for at least four

seconds resulting in three blue ashes.

2. With the G4 turned ON, press and hold the Mobile Button for

at least six seconds until the Red and Blue Lights begin rapidly

alternating.

3. Search for Bluetooth devices on your phone by following the phone’s

instructions. Consult your phone’s User Manual for more information.

4. After a few seconds the phone will list “scala rider G4” as a

discovered device. Select it and follow your phone’s instructions to

accept the pairing.

5. When prompted, enter 0000 (four zeros) as your PIN or passkey.

6. Your phone will conrm that pairing has succeeded and the G4 will

begin ashing slowly in Blue.

NOTES:

• If the Pairing process is not completed within two minutes, the G4 will return

to Standby mode.

• Not all Bluetooth mobile phones can broadcast Bluetooth Stereo music

(A2DP), even if the phone has an MP3 player function. Consult your mobile

phone’s User Manual for more information.

• With some mobile phones, you may need to tap the Mobile Button

to connect the G4 to the phone after pairing is complete. The G4 will

automatically connect to the last phone it is paired with.

6.2 GPS DEVICE

To use a Bluetooth enabled GPS device with the

scala rider G4, the two must rst be paired. This will

allow your GPS to transmit navigation instructions and audio to the

speakers of your G4.

NOTE: Not all Bluetooth enabled GPS devices allow connections to

Bluetooth headsets or communication systems. Among others, any

such GPS unit must be compatible with the Bluetooth “Handsfree”

gateway protocol. Please consult your GPS device’s User Manual for more

information.

PAIRING THE G4 TO A GPS DEVICE:

1. Turn on your GPS.

2. With the G4 turned ON, press and hold the Volume Up Button for

at least six seconds until the Red and Blue Lights begin ashing

simultaneously.

3. Search for Bluetooth headsets on your GPS device by following the

device’s instructions. Consult your GPS device’s User Manual for

more information.

4. After a few seconds the GPS will list “scala rider G4” as a

discovered device. Select it and follow your GPS’s instructions to

accept the pairing.

5. If your GPS device prompts for a PIN or Passkey enter 0000 (four zeros).

6. Your GPS device will conrm that pairing has succeeded. The

headset will begin ashing slowly in Blue.

7. If you wish to use a Bluetooth mobile phone to make and receive

calls through the G4, you should pair your mobile phone to your

GPS device by following the instructions in your GPS manual.

scala rider

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cardo Scala rider G4 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cardo Scala rider G4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info