Bedienungsanleitung Cardo Scala rider G4 (Seite 10 von 27) (Englisch)

480782

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

NOTES:

• If the Pairing process is not completed within two minutes the G4 will

return to Standby mode.

• The priority schedule of your G4 has been set to avoid incoming intercom

calls interrupting GPS instructions in progress. In such case the intercom

caller will hear a busy signal and you will hear two beeps, indicating that

an intercom caller is trying to page you. (see section 4.3 for details on audio

priorities of paired devices).

6.3 MP3 MUSIC WIRELESS OPTION  A2DP

Your G4 is designed to receive wireless stereo music from A2DP

sources and mobile phones that support the Bluetooth A2DP

and AVRCP proles (mostly 3rd generation devices).

Using a Bluetooth device that supports the AVRCP prole will allow you to

operate all major A2DP source functions directly from your G4.

NOTE: The G4 can also receive audio via the enclosed cable from non-

Bluetooth MP3 Players or audio sources as described in section 7.2

While listening to music from an A2DP source, you will not miss

any mobile or intercom calls, as the headset will automatically stop

the music and give preference to the incoming call. However, after

you terminate your call, some MP3 sources may not automatically

continue and require manual re-activation.

The scala rider G4 allows you to pair your mobile phone for use

during phone calls and also as a Stereo Bluetooth (A2DP) music player,

if your phone supports this feature.

The scala rider G4 also allows you to use two dierent A2DP devices

interchangeably: simply pair an A2DP music player (MP3 Player or

Adapter) to the G4 for music and use the mobile phone for phone

calls and/or music (if A2DP compatible) as described in Section 6.1.

SETTING UP YOUR MP3 PLAYER FOR BLUETOOTH STEREO A2DP

TRANSMISSION

To use a Bluetooth Stereo (A2DP) enabled MP3 Player or Adapter to

listen to stereo music, you must rst pair the device to your G4.

PAIRING THE G4 TO AN MP3 PLAYER OR A2DP ADAPTER

NOTE: If your A2DP source is integrated inside your Mobile Phone, then

you should pair it with your G4 as described in section 6.1 above

1. Turn on your MP3 Player or A2DP Adapter, and make sure that its

Bluetooth function is activated.

2. With the G4 turned ON, press and hold the Mobile Button for at

least six seconds until the Red and Blue Lights begin alternating

rapidly.

3. Search for Bluetooth headsets on your MP3 Player by following the

device’s instructions.

NOTE: For use of a Bluetooth adapter, follow the device’s instructions.

4. After a few seconds the MP3 Player will list “scala rider G4”

as a discovered device. Select it and follow your MP3 Player’s

instructions to accept the pairing.

5. If your MP3 player prompts for a PIN or Passkey enter 0000 (four zeros).

6. Once pairing is complete, your MP3 Player or Adapter may conrm that

pairing has succeeded, and the G4 will begin ashing slowly in Blue.

NOTE: If the Pairing process is not completed within two minutes the G4

will return to Standby mode.

A2DP Audio Source Selection:

If an A2DP Music Player is paired, the headset will use it as the default

audio source. To change the audio source from the current device

to the other device, stop the music playing from the current device

scala rider

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cardo Scala rider G4 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cardo Scala rider G4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info