469905

Carrera Digital 124 - 23608 Race Competition en WIRELESS Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
11
Preparation of start
receiver/tower


Please connect the receiver as shown in gure
. When connect-
ing one tower it is irrelevant which speed controller-connector you
choose to connect the receiver/tower. Please take into considera-
tion that the WIRELESS system only works with the signals of the
Wireless speed controller being able to be received by the receiver,
not being interrupted by any objects or persons.
The Carrera DIGITAL 124/132 Black Box allows a mixed operation
of WIRELESS- and wired speed controllers ( up to a maximum of
6 speed controllers).
Switch on Black Box as per gure
. Turn on speed controller on
bottom-side (g.
). Directly after the speed controller has been
switched on the speed controller´s encoding will be indicated by
the number of ashings, see gure
(e.g. ashing 3x = speed
controller 3). After 2 seconds the LED switches to a ashing rhythm
at regular intervals indicating readiness for operation. In case the
speed controller is not activated it automatically switches to the
energy-saving mode after 20 seconds. By pressing the tappet or the
lane-change-button the speed controller can be reactivated.
Encoding Wireless
speed controller
Switch on speed controller while pressing lane-change-button on
speed controller´s bottom (g.

+
). LED lights permanently
(g.
). Release lane-change-button and push accordingly (e.g.
push 2x = speed controller 2)(g.
). Conrm programming by
pressing speed controller´s tappet (g.
). Successful program-
ming will be indicated by LED ashing according to the encoding
(g.
).
Insertion/exchange
of batteries
OFF / ON
To operate the WIRELESS speed controller 3 x AA (R6) batteries
are required (not included in delivery). A reduced range between the
speed controller and the receiver/tower and a minor driving perform-
ance of the vehicles are an indication of a battery power drop. In this
case the batteries need to be exchanged at the bottom of the speed
controllers (g.
) as illustrated (g.
).
Using new batteries/rechargeable batteries a permanent playing
time of approx. 48 hours or a standby time of approx. 200 hours
can be assumed.

Operation with rechargeable batteries is not possible.
Preparation of start
This Carrera DIGITAL 124 vehicle ideally matches the Carrera track
system scale 1:24.
Depending on the car type it is advisable to remove or not to im-
plement the spacing plate when using a Carrera crossing or high
banked curve. With those track elements being used, slight driving
noises may occur. These are caused by the cars´ scale authenticity
and do not have any inuence on a faultless operation.

To ensure proper and continuous driving, slightly fan out the ends
of the contact brushes
and bend them towards the track as per
g.
. Only the end of the contact brush should have contact to the
track and may be cut o slightly in case of wear. Dust and abrasion
should be removed from track material and sliding contacts from
time to time.
Preparation of start and
points function
Make sure that the car’s guide keel is located inside the
track slot and that the double sliding contact is in contact with the
current carrying track.
Place the cars onto the connecting track.
       

Replacement of double
contact brushes and guide keel
In case the car is lifted, the rocker bar folds up slightly (g.
).
For changing the guide keel or the double contact brushes the
rocker bar can be folded up widely according to g.
.
For changing the guide keel and the double contact brushes the
guide keel should be removed rst.
Afterwards both double contact brushes can be removed and
changed. Please take care that in stage one the upper contact
brush
is only pulled out partly and in stage two the double
contact brush is pulled out completely with the contact brush
For inserting please proceed the same way.
Height adjustment
car chassis
Before you can begin adjusting the chassis and the magnets it is
necessary to detach the car body from the vehicle. Remove the
mounting screws on the underside of the car and lift o the car
body.

Remove the two screws from the front axle mounting and detach
the entire front axle including the mounting from the chassis.
Detach the mounting from the axle, turn it through 180 degrees
and insert the axle back into the mounting
. Now you can return
the front axle and mounting unit to the chassis.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Carrera Digital 124 - 23608 Race Competition en WIRELESS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info