Bedienungsanleitung Carrera Digital 124 - 23608 Race Competition en WIRELESS (Seite 7 von 8) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

469905

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Setting basic speed



1 – 10



(individually for one and/or several cars)



1. Switch o Black Box, place car/s on the track, eect coding of

WIRELESS speed controller to speed controller 1 as per point „Cod-

ing/Decoding“.

2. Switch on WIRELESS speed controller located on lower side

(ON/OFF switch).

3. Press and hold lane-change-button during Black Box is switched

on again. Don´t release the lane-change-button until the 1st LED

lights red. Levels are set by pushing lane-change-button. Conrm

speed by pressing the speed controller´s tappet (thumb) (=> middle

LED will light).













1 LED on = low speed

5 LEDs on = high speed

Setting braking effect



1 – 10



(individually for one and/or several cars)



1. Switch o Black Box, place car/s on the track, eect coding of

WIRELESS speed controller to speed controller 2 as per point „Cod-

ing/Decoding“.

2. Switch on WIRELESS speed controller located on lower side

(ON/OFF switch).

3. Press and hold lane-change-button during Black Box is switched

on again. Don´t release the lane-change-button until the 1st LED

lights red. Levels are set by pushing lane-change-button. Conrm

braking eect by pressing speed controller´s tappet (thumb) (=>

middle LED will light). Before the start return speed controller to the

original connector!













1 LED on = low braking eect

5 LEDs on = high braking eec

Setting fuel tank capacity

Pit Stop 30346







1 – 10



(individually for one and/or several cars)



Activate fuelling function at the Black Box.



1. Switch o Black Box, place car/s on the track, eect coding of

WIRELESS speed controller to speed controller 3 as per point „Cod-

ing/Decoding“.

2. Switch on WIRELESS speed controller located on lower side

(ON/OFF switch).

3. Press and hold lane-change-button

during Black Box is switched on again. Don´t release the lane-

change-button until the 1st LED lights red. Fuel capacity is set

by pushing lane-change-button. Conrm by pressing speed con-

troller´s tappet (=> middle LED will light).

Before the start return speed controller to the original connector!













1 LED on = low fuel capacity

5 LEDs on = full tank



Depending on the fuel capacity the car´s lights start to ash after

some time, the car slows down and might start to stutter. For refuel-

ling enter the Pit Stop and release the speed controller´s tappet.

(Fuelling amount depends on car´s standing time in the Pit Stop).

a) Filling up: wait until car´s lights stop ashing.

b) Partial refuelling: start while car´s lights still ash.

c) Non-refuelling: car drives on at reduced speed.

Maintenance and care





To ensure a proper operation of the motor-racing circuit, all race-

track components should be regularly cleaned. Pull the plug prior to

cleaning.





 Keep the track surface and track slots clean with a

dry cloth. Do not use any solvents or chemicals for cleaning. When

it is not in use, store the racetrack in a clean and dust-protected

location, preferably in the original cardboard box.





 Clean axle and wheel bearings, pinion gears, gear-

wheels and bearings and lubricate using a resin- and acid-free

grease. You can use a toothpick or similar as aid. Regularly check

the condition of sliding contacts and tyres..

Troubleshooting

Driving tips



In case of any malfunctions, please check the following:

• Has the connection to the power supply been established cor-

rectly?

• Have transformer and speed controllers been connected

correctly?

• Are the track connections faultless?

• Are the racetrack and track slots clean and free of any foreign

objects?

• Are the sliding contacts in order and do they make contact with

the track slot?

• Are the cars correctly coded to the according speed controller?

• The track‘s current feed will be switched o automatically for 5

seconds, if there is an electrical short circuit: this will be notied by

audible and visual signals.

• Are the cars placed on the track in running direction? In case of

non-functioning push the running direction switch which is on the

car´s bottom.

• Please take into account that exposing the Carrera WIRELESS

System for Carrera DIGITAL 124/132 to direct or strong extraneous

light (sunlight, halogen lamps, neon lamps and big at screens) may

result in malfunctions.

• Double encoding of the speed controllers will be indicated by the

LED ashing quickly.

• Should operation be impossible despite the speed controllers and

Black Box having being switched on, please check the connection

between Receiver/Tower and Black Box.

• In case the receiving radius decreases or the cars´ driving charac-

teristics deteriorate please check the batteries.



During operation small car parts as spoilers or mirrors may get o or

brake due to being original detailed parts of the car model. To avoid

this it is possible to remove them before operation.



• You can drive fast along the straight track but you should brake

before the curve and then accelerate again when coming out of the

curve.

• Do not fasten or block the vehicles when the motor is running:

overheating or damage to the motor could result otherwise.

 When using track systems which are not manufactured by

Carrera the existing guide keel has to be replaced by the special

guide keel (#85309). While using the Carrera crossing (#20587) or

high banked curve 1/30° (#20574) slight driving noise might occur

which is due to the full-scale genuineness and does not aect aw-

less operation.

All Carrera spare parts are available in the webshop:



Delivery exclusively to Germany, Austria, Netherlands, Belgium and

Luxembourg..

Technical specifications



18 V

54 VA

18 V 43,2 VA



6 x 1.5 V Mignon batteries (AA/R6).

Batteries are not included in delivery.



It is not possible to use rechargeable batteries.



1.) Operating mode = cars are operated via speed controllers

2.) Idle mode = speed controllers not activated, no game

3.) Stand-by mode = after approx. 20 minutes idle mode the

connecting section switches to stand-by mode. LED ashes at

long intervals.

By operating the speed controller the stand-by mode is nished,

the racetrack returns to idle-mode again.

4.) O-state = power supply unit disconnected from mains supply

This device is marked by “selective sort throught” symbol related to

sort through domestic, electric and electronic, waste.

This means the product must be treated by a specialized “sorting/

collecting” system in accordance with European directive 2002/96/

CE, to reduce the impact upon environment.

For more precise information, please contact your local administra-

tion.

Electronical product which are not going through special collect-

ing, are potentially dangerous for environment and human health,

because of dangerous substance.

Carrera Digital 124 - 23608 Race Competition en WIRELESS Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info