17
4 6
7
A
screwed tight.
Front T unscrew car’s
part
1
and
2
). Slightly bend do
3
) and pull up the
board.
4
),
in.
their colours.
Rear Remov
board
5
Slightly
6
) and pull up
hook in
7
) fit together
their colours.
Maintenance
1
2
T
track components should
cleaning.
1
Racetrack: Keep the
dry cloth.
it
location, preferably in the original cardboard bo
2
Car check: Clean
wheels and bearings and lubricat a r acid-free
grease. Y
the condition of sliding contacts and tyres..
T
Driving
T
In case of any malfunctions, please check the following:
• the connection to power supply established cor-
rectly?
•
•
• the track of
objects?
•
the track slot?
•
• track‘s be off
seconds, if
audible and visual signals.
•
non-functioning
car´s bottom.
•
•
•
•
•
•
Note:
During oper
brake due
this it is possible to remov
Driving technique:
•
before the curve and then accelerate again when coming out of the
curve.
• not the
overheating or damage to the mo
Note: using
Carrera
guide keel
high
which is due to the full-scale genuineness and does not affect flaw-
less operation.
All Carrera spare parts are av
carrera-toy
Delivery ex
Luxembourg.
T
Output voltage: T
18 V 54 V
Lithium polymer rechargeable battery: 3,7 150mAh
Electricity modes:
1
2.) Idle mode = speed controllers not activated, no game
3.) Stand-by mode = after approx. 20 minutes idle mode the
connecting section switches to stand-by mode. LED flashes at
long intervals. CURRENT CONSUMPTION < 0.5 watt / 0.5w
By operating the speed controller the
the racetrack returns t
4.) Off-state = power supply unit disconnected from mains supply
This device is marked by “selective sort throught” symbol related to
sort
the
tem
the impact upon environment. F
contact your local administration. Electronical product which are
not
environment and human health,
Output voltage: T
18 V 54 V
Lithium polymer rechargeable battery: 3,7 150mAh
Electricity modes:
1
2.) Idle mode = speed controllers not activated, no game
3.) Stand-by mode = after approx. 20 minutes idle mode the
connecting section switches to stand-by mode. LED flashes at
long intervals. CURRENT CONSUMPTION < 1 watt / 1w
By operating the speed controller the
the racetrack returns t
4.) Off-state = power supply unit disconnected from mains supply
Requirement
Warning: Changes or modifications not expressl
by the
authority to operate the equipment.
Note: This
limits
Rules.
against harmful interference in a residential installation.
This can
energy and, if
tions, may cause harmful interference to r
Howev
a particular installation.
If this equipment does cause harmful inter
sion
off and
by one or more of the follo
•
•
• the on
from that to which the receiver is connected.
•
help.
W
Guidelines and warnings about using the LiPo battery/
batteries:
LiPo rechargeable batteries are muc the
traditional this in-
structions
treatment
dling,
take ov
•
For recharging
used.
may endanger your health and/or cause damage to pr
NEVER use any other charging unit!
•
vision. When charging, never lea
When you r
to keep watch on the process so
problem.
•
process, stop the
and
awa
for at
tery which has already s
fire! Even at
must be taken out of service.
•
flammable materials.
•
Do not expose the batter
heat. T
•
becoming deep discharged. When it is
tery from time to time, say e
methods of handling described abov
•
or
all costs.
•
types may be used. Damaged or
waste, and must be disposed of accordingly
• on
expose to temperatures. may a fire an
explosion.
• electrolyte electrolyte LiPo
hazardous to health. Alwa
If mak contact skin, other of
body
water and a doctor mus
• batteries are not toys the
hands of children. K
• connector must be
circuited!
•
designed for use with toy
•
