Bedienungsanleitung Carrier 51QPD (Seite 15 von 19) (Englisch)

717501

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Operation

Operation Instructions

COOL operation

-Press the "MODE" button until the "COOL" indicator light

comes on.

-Press the ADJUST buttons "+" or "-" to select your

desired room temperature. The temperature can be set

within a range of 17°C~30°C/62°F~86°F(or 88°F).

-Press the "FAN SPEED" button to choose the fan speed.

AUTO operation

-When you set the air conditioner in AUTO mode, it will

automatically select cooling, heating(cooling only models

without), or fan only operation depending on what

temperature you have selected and the room

temperature.

-The air conditioner will control room temperature

automatically round the temperature point set by you.

-Under AUTO mode, you can not select the fan speed.

NOTE: Under AUTO mode, both the AUTO mode and the

actual operation mode indicator lights illuminate for some

models.

FAN operation

-Press the "MODE" button until the"FAN " indicator light

comes on.

-Press the "FAN SPEED" button to choose the fan speed.

The temperature can not be adjusted.

-Do not put the duct to window.

SLEEP(ECO) operation

-Press this button, the selected temperature will increase

(cooling) or decrease(heating) by 1°C/2°F(or 1°F) 30

minutes. The temperature will then increase (cooling)

or decrease (heating) by another 1°C/2°F(or 1°F) after

an additional 30 minutes. This new temperature will be

maintained for 7 hours before it returns to the originally

selected temperature. This ends the Sleep/Eco mode

and the unit will continue to operate as originally

programmed.

NOTE: This feature is unavailabe under FAN or DRY

mode.

TIMER operation

-When the unit is on, press the Timer button will initiate

the Auto-off stop program, the TIMER OFF indicator light

illuminates. Press the UP or down button to select the

desired time. Press the TIMER button again within 5

seconds, the Auto-on start program is initiated.

And the TIMER ON indicator light illuminates. Press the

up or down button to select the desired Auto-on start time.

-When the unit is off, press the Timer button to initiate

the Auto-on start program, press it again within 5

seconds will initiate the Auto-off stop program.

-Press or hold the UP or DOWN button to change the

Auto time by 0.5 hour increments, up to 10 hours, then

at 1 hour increments up to 24 hours. The control will

count down the time remaining until start.

-The system will automatically revert back to display the

previous temperature setting if there is no operation in

a 5 seconds period.

-Turning the unit ON or OFF at any time or adjusting the

timer setting to 0.0 will cancel the Auto Start/Stop timer

program.

HEAT operation(cooling only models without)

-Press the "MODE" button until the "HEAT" indicator

light comes on.

-Press the ADJUST buttons "+" or " - " to select your

desired room temperature. The temperature can be set

within a range of 17°C~30°C/62°F~86°F(or 88°F).

-Press the "FAN SPEED" button to choose the fan speed.

For some models, the fan speed can not be adjusted

under HEAT mode.

DRY operation

-Press the "MODE" button until the "DRY" indicator light

comes on.

-Under this mode, you cannot select a fan speed or

adjust the temperature. The fan motor operates at

LOW speed.

-Keep windows and doors closed for the best

dehumidifying effect.

-Do not put the duct to window.

Other features

FOLLOW ME/TEMP SENSING feature(optional)

NOTE:This feature can be activated from the remote

control ONLY. The remote control serves as a remote

thermostat allowing for the precise temperature control

at its location. To activate the Follow Me/Temp Sensing

feature, point the remote control towards the unit and

press the Follow Me/Temp Sensing button. The remote

control will send this signal to the air conditioner until

press the Follow Me/Temp Sensing button again. If the

unit does not receive the Follow Me/Temp Sensing signal

during any 7 minutes interval, the unit will exit the

Follow Me/Temp Sensing mode.

NOTE: This feature is unavailabe under FAN or DRY

mode.

AUTO-RESTART

If the unit breaks off unexpectedly due to the power cut,it

will restart with the previous function setting automatically

when the power resumes.

AIR FLOW DIRECTION ADJUSTMENT

The louver can be adjusted automatically. Adjust the air

flow direction automatically:

-When the Power is ON, the louver opens fully.

-Press the SWING button on the panel or remote

controller to initiate the Auto swing feature. The louver

willl swing up and down automatically.

-Please do not adjust the louver manually.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carrier 51QPD Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Carrier 51QPD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info