Bedienungsanleitung Carrier 51QPD (Seite 17 von 19) (Englisch)

717501

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Maintenance

Please check the machine according to the following form before asking for maintenance:

Faults Diagnosis

Problem Possible Cause

P1 Error Code

In COOL mode: room

temperature is lower than

the set temperature

The air ﬁlter is blocked with

dust or animal hair

The unit is low on

refrigerant

Temperature setting is too

high

The windows and doors in

the room are open

The room area is too large

Troubleshooting

Reset the temperature

Unit does not turn

on when pressing

ON/OFF

button

Unit does not cool

well

The unit is noisy

and vibrates too

much

The unit makes a

gurgling sound

Exhaust hose is not

connected or is blocked

The Water Collection Tray is full.

Turn off the unit, drain the water

from the Water Collection Tray

and restart the unit.

There are heat sources

inside the room

Turn off the unit and clean the

ﬁlter according to instructions

Call a service technician to inspect

the unit and top off refrigerant

Decrease the set temperature

Make sure all windows and doors

are closed

Double-check the cooling area

Turn off the unit, disconnect the

hose, check for blockage and

reconnect the hose

Remove the heat sources if

possible

The ground is not level

Place the unit on a ﬂat, level

surface

The air ﬁlter is blocked with

dust or animal hair

Turn off the unit and clean the

ﬁlter according to instructions

This sound is caused by the

ﬂow of refrigerant inside

the unit

This is normal

Maintenance Tips

Clean the Unit

Store the unit when not in use

-Be sure to clean the air ﬁlter every 2 weeks for optimal performance.

-The water collection tray should be drained immediately after P1

error occurs, and before storage to prevent mold.

-In households with animals, you will have to periodically wipe down

the grill to prevent blocked airﬂow due to animal hair.

Clean the unit using a damp, lint-free cloth and mild

detergent. Dry the unit with a dry, lint-free cloth.

-Run the appliance on FAN mode for 12 hours in a warm room to

dry it and prevent mold.

-Turn off the appliance and unplug it.

-Clean the air ﬁlter according to the instructions in the previous

section. Reinstall the clean, dry ﬁlter before storing.

-Remove the batteries from the remote control.

-Drain the unit’s water collection tray according to the instructions in

the following section.

Be sure to store the unit in a cool, dark place. Exposure to direct

sunshine or extreme heat can shorten the lifespan of the unit.

NOTE: The cabinet and front may be dusted with an oil-free

cloth or washed with a cloth dampened in a solution of

warm water and mildliquid dishwashing detergent. Rinse

thoroughly and wipe dry. Never use harsh cleansers, wax

or polish on the cabinet front. Be sure to wring excess

water from the cloth before wiping around the controls.

Excess water in or around the controls may cause

damage to the unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carrier 51QPD Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Carrier 51QPD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info