Bedienungsanleitung Casals CRH10REAK (Seite 5 von 48) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

799657

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

performed. Use the appliance for operations different

from those intended could result in a hazardous

situation.

- Unplug the appliance from the mains before

replacing any accessory.

- Let the appliance running with no load for 30

seconds in a safe position. If you notice serious

vibration or other defects stop the appliance

immediately. Then check the problem and /or proceed

as we describe on Anomalies and Repair clause.

Service:

- Make sure that the appliance is serviced only by

specialist personnel, and that only original spare

parts or accessories are used to replace existing

parts/accessories.

- CAUTION: There is a risk of fire if the appliance’s

cleaning is not done according to these instructions.

- Any misuse or failure to follow the instructions for

use renders the guarantee and the manufacturer’s

liability null and void.

Installation

Auxiliary Operation

- Operate the appliance only with the auxiliary handle.

- Turn the auxiliary handle in counter clockwise

direction for adjustment (E).

- Set the auxiliary handle on the appliance into the

required position.

- Tighten the auxiliary handle in clockwise direction

(E).

- The depth can be set with the depth gauge (F).

Thereby loosen the winged screw (O)

- Set de required drilling depth.

- Tighten the winged screw (O).

Instructions for use

Before use:

- Make sure that all the product’s packaging has been

removed.

- Prepare the appliance according to the function you

wish to use:

Fitting the working tools: (Fig. 2)

- Unplug the appliance from the mains.

- Only use tools with SDS-plus shaft

- Clean and grease the shaft of the tool.

- Install the drill bit or accessory in the drill

chuck. Turn the drill bit slightly until it can be

pushed in all the way and you can feel it engages

into place.

- Ensure that the drill bit is locked.

SDS-plus adapter for drilling in wood or

metal (Fig. 2)

- Unplug the appliance from the mains.

- Fit the SDS-plus adapter (L) into the SDS-plus

chuck as described above.

- Screw the Drill Chuck (K) on the mounting shaft

and Screw the mounting Screw (M).

- Open the drill chuck (K), whilst the device is

completely switched off.

- Insert the drill bit, screwdriver bit, or other tool/

accessory required for the task, into the chuck.

In order to obtain a secure fastening of the bit,

insert the bit as far as you can into the chuck.

- Insert the drill bit and tighten the drill chuck

with the drill chuck key (P)

- Don’t use rotation with hammering when the

SDS-plus adaptor + drill chuck is installed on

the device.

How to select the direction of the

rotation (Fig 1)

- Do not change the direction of the rotation

whilst the tool motor is in operation.

- The appliance has a selector (D), which allows

the direction of rotation to be changed.

Drilling, Driving and Hammer Drilling

(Fig 1)

Drilling and driving (wood, steel,

diamond core drilling (dry), …)

- Turn the selector (C) until points to

Hammer drilling (concrete, granite…)

- Turn the selector (C) until points to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casals CRH10REAK Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info