799657
6
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Screwing, drilling/unscrewing:
- To drill or screw, ALWAYS have the direction set to
clockwise (CW).
- To unscrew, set the direction to counter clockwise
(CCW).
- The appliance should not be in use when changing
the screwing direction.
Electronic speed control (Fig. 1):
- The speed of the appliance can be regulated by
using the speed regulator control (I). This function
is very useful, as it makes it possible to adapt the
speed of the appliance to the type of work that
needs to be done.
- The speed of the appliance can be regulated
according to the pressure exerted on the on/off
switch (H). This function is very useful, as it makes
it possible to adapt the speed of the appliance to
the type of work that needs to be done.
- If the appliance works continuously at low speed,
working life of the appliance will be reduced
considerably.
Use:
- Connect the appliance to the mains.
- Select the appliance function desired. (C)
- Select the desired speed. (I)
- Place the appliance against the surface you want
to work.
- Press the appliance until the lengthways play is
taken up.
- Turn the appliance on, by using the on/off
button (H).
Note: Exerting high pressure does not increase
machine effectiveness!
WARNING: When the bit begins to penetrate concrete
or comes up against the reinforcement rods in the
concrete, the tool may react dangerously. Make sure
you keep your balance by distributing your weight
evenly and keeping your feet in a safe position
whilst holding the tool firmly in both hands to avoid
dangerous reactions.
damaged, it must be replaced and you should
proceed as you would in the case of damage.
Specifications:
CRH10REA / CRH10REAK
- Rated power (W): 400
- Rated Voltage: 220-240V~
- No load speed (rpm): 0-1500
- Blows per minute (ipm) 0-3600
- Maximum capacity in concrete (mm): 10
- Maximum capacity in steel (mm): 13
- Maximum capacity in wood (mm): 20
- Reversible / Electronic yes
- Weight (Kg:) 1,7
- Acoustic pressure level (dB(A)) < 90,5
- Vibration (m/s2) < 11
- Not suitable for use in presence of flammable
anaesthetic mixture with air or with Oxygen or
nitrous oxide
NB: These specifications are subject to change
without notice of purpose of improvement.
For EU product versions and/or in case that it is
requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate public
recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to the
environment.
- This appliance contains, or could contain,
oil. Remember that one should abide by the
regulations concerning the elimination of this type
of contaminant.
Locking button:
- To activate this function press button (J) while
holding down the run button (H).
- To deactivate this function press the run (H)
button right down.
Once you have finished using the
appliance:
- Stop the appliance by releasing the on/off switch.
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition
of cleanliness, its surface may degrade and
inexorably affect the duration of the appliance’s
useful life and could become unsafe to use.
Supplies
- Always use original supplies, designed
specifically for your appliance model.
- These supplies are available in specialist
shops.
Anomalies and repair
- Take the appliance to an authorised technical
support service if a product damage or other
problems arise. Do not try to dismantle or repair
without assistance, as this may be dangerous.
- If the connection to the mains has been
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casals CRH10REAK wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info