4
Operation Guide 3095
End time
Start time
To configure Hourly T
1. In the D to display the Hourly T
Signal (SIG ) screen.
2. Hold down A until the Hourly T
starts to flash. This is the setting screen.
• This also will turn on the Hourly T
3. Press C to move the flashing in the sequence shown
below to select other settings.
Start Time
(from )
End Time
(to )
Repeat Pattern
(REP )
4. While a setting is flashing, use D (+) and B ( –) to
change it.
• When the start time and end time settings specify a
period that is 24 hours long (such as a start time of
7:00 a.m. and an end time of 6:00 a.m.), ALL is
displayed for both the start time and the end time.
• Y
below
Hourly time signal
on indicator
On/Off status
5. Press A to exit the setting screen.
• With the 12-hour format, set the time correctly as a.m. ( A). or p.m.( P).
To turn the Hourly T
1. In the D to display the Hourly T
Signal (SIG ) screen.
2. Press B to toggle the Hourly Ton ) and
off (OFF ).
• An Hourly T
Mode Hourly T
Signal is on.
• The Hourly T
all modes while the Hourly T
T
Daily
Daily on Saturday and Sunday
Daily from Monday through Friday
Select this setting:
DAIL
wEND
wDA
DST indicator
Timekeeping
Mode time
World Time
World Time City code
Dual Time
Dual Time City code
World Time
World T
zones) around the world.
• All of the operations in this section are performed in the
World TC.
To view the time for another city code
In the World TD to scroll eastward
through city codes or B to scroll westward.
• For full information about city codes, see the “City Code
T”.
• If the current time for a city is wrong, check your
Timekeeping Mode time and Home City code settings
and make necessary changes.
• Y
Timekeeping Mode. For more information, see “ T
the time and date”.
• Y
information, see “ T”.
To toggle a city code time between Standard T
1. In the World TD and B to display the
city code (time zone) whose Standard T
Saving T
2. Hold down A for about one second to toggle between
Daylight Saving TDST displayed) and Standard
TimDST not displayed).
• The DST indicator is on the display whenever you
display a city code for which Daylight Saving T
turned on.
• Note that the DST/Standard T
currently displayed city code. Other city codes are not
affected.
• Y
Time setting for the city code selected for your Dual
Time City
Parallel to ground More than 40
°
Auto light switch
indicator
Illumination
This watch has an EL (electro-luminescent) panel that
causes the entire display to glow for easy reading in the
dark. The watch’ s auto light switch turns on illumination
automatically when you angle the watch for reading
towards your face.
• The auto light switch must be turned on (indicated by
the auto light switch indicator) for it to operate.
• See “ Illumination Precautions ” for more important
information.
To illuminate the display manually
In any mode, press L to turn on illumination for about
one second.
• The above operation turns on illumination regardless of
the current auto light switch setting.
About the
While the auto light switch is enabled, illumination turns on whenever you position
your wrist as described below in any mode.
Moving the watch to a position that is parallel to the ground and then tilting it
towards you more than 40 degrees causes illumination to turn on.
• Wear the watch on the outside of your wrist.
Warning!
•
•
• Always make sure you are in a safe place whenever you are reading the watch
using the auto light switch. Be especially careful when running or engaged in
any other activity that can result in accident or injury
sudden illumination by the auto light switch does not startle or distract others
around you.
•
•
• When you are wearing the watch, make sure that its auto light switch is turned
off before riding a bicycle or operating a motorcycle or any other motor
vehicle. Sudden and unintended operation of the auto light switch can create
a distraction, which can result in a traffic accident and serious personal injury
To turn the auto light switch on and of
In the TL for about three seconds to toggle the auto
light switch on (auto light switch indicator displayed) or off (auto light switch indicator
not displayed).
• The auto light switch indicator is on the display in all modes while the auto light
switch is turned on.
• In order to protect against running down the battery
automatically approximately six hours after you turn it on.
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto Display
Auto Display cycles automatically through the screen of
each mode.
To turn of
Press A or C .
To turn on
In the TB and D for about
two seconds.
• Note that
setting screen is on the display
Graphic Area
The graphic area indicates different types of data,
depending on the mode you are in, as described below
Graphic area
Flash Alert
When Flash
display will flash in time with stopwatch
countdown alarm, alarms, and the Hourly T
To turn Flash
1. In the TA until the
seconds start to flash, which indicates the setting
screen.
2. Press C ten times to display the Flash
3. Press D to toggle Flash SYNC displayed) and off (OFF displayed).
4. Press A twice to exit the setting screen.
• The Flash
• Y
To test Flash
In the TB to cause the red and green LEDs to flash
alternately
Contrast Adjustment
Y
To adjust contrast
1. In the Timekeeping Mode, hold down A until the seconds start to flash, which
indicates the setting screen.
2. Press C 1CNT ) screen.
3. Use D (+) and B (–) to scroll through the available display format numbers
(1 through 7 ).
4. Press A twice to exit the setting screen.
Button Operation T
The button operation tone sounds any time you press one of the watch’ s buttons.
can turn the button operation tone on or off as desired.
• Even if you turn off the button operation tone, the alarms, the Hourly T
the countdown alarm, and stopwatch
Mode
Timekeeping
Stopwatch
(Elapsed Time Screen)
Stopwatch
(Lap Time Screen)
Recall
Countdown Timer
Alarm
World T
Graphic Area
Timekeeping Mode seconds
Stopwatch elapsed time
seconds
Stopwatch lap time seconds
Elapsed time seconds
Countdown time seconds
Timekeeping Mode seconds
Timekeeping Mode seconds
