Bedienungsanleitung Casio 3095 (Seite 5 von 5) (Englisch)

522100

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Operation Guide 3095

Mute indicator

To turn the button operation tone on and off

In any mode (except when a setting screen is on the

display), hold down C to toggle the button operation tone

on (mute indicator not displayed) and off (mute indicator

displayed).

• Holding down C to turn the button operation tone on or

off also causes the watch’s current mode to change.

• The mute indicator is displayed in all modes when the

button operation tone is turned off.

Auto Return Feature

If you leave a screen with flashing digits on the display for two or three minutes

without performing any operation, the watch exits the setting screen automatically.

Scrolling

The B and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls at high speed.

Initial Screens

When you enter the Stopwatch, Alarm or World Time Mode, the data you were

viewing when you last exited the mode appears first.

Timekeeping

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

World Time

• All World Time Mode times are calculated from the current Home City time in the

Timekeeping Mode using UTC time differential values.

• The seconds count of the World Time is synchronized with the seconds count of the

Timekeeping Mode.

• The UTC differential is a value that indicates the time difference between a

reference point in Greenwich, England and the time zone where a city is located.

• The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds.

Leap seconds are added or subtracted as necessary to keep UTC in sync with the

Earth’s rotation.

Illumination Precautions

• The electro-luminescent panel that provides illumination loses power after very long

use.

• Illumination may be hard to see when viewed under direct sunlight.

• The watch may emit an audible sound whenever the display is illuminated. This is

due to vibration of the EL panel used for illumination, and does not indicate

malfunction.

• Illumination turns off automatically whenever an alarm sounds.

• Frequent use of illumination runs down the battery.

Auto light switch precautions

• Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light

switch to operate when it is not needed, which shortens battery life. If you want to

wear the watch on the inside of your wrist, turn off the auto light switch feature.

• Illumination may not turn on if the face of the watch is

more than 15 degrees above or below parallel. Make

sure that the back of your hand is parallel to the ground.

• Illumination turns off in about one second, even if you

keep the watch pointed towards your face.

• Static electricity or magnetic force can interfere with

proper operation of the auto light switch. If illumination

does not turn on, try moving the watch back to the

starting position (parallel with the ground) and then tilt it

back towards you again. If this does not work, drop your

arm all the way down so it hangs at your side, and then

bring it back up again.

• Under certain conditions, illumination may not turn on until about one second after

you turn the face of the watch towards you. This does not necessarily indicate

malfunction of the auto light switch.

• You may notice a very faint clicking sound coming from the watch when it is shaken

back and forth. This sound is caused by mechanical operation of the auto light

switch, and does not indicate a problem with the watch.

City Code Table

City

UTC

Other major cities in same time zone

Code Differential

Pago Pago

Honolulu

Anchorage

Los Angeles

Denver

Mexico City

Chicago

New York

Caracas

Rio De Janeiro

Buenos Aires

Praia

Lisbon

London

Madrid

Paris

Amsterdam

Monte Carlo

Rome

Berlin

Prague

Stockholm

Athens

Ankara

Nicosia

Helsinki

Cairo

Jerusalem

Moscow

Jeddah

Doha

Tehran

Dubai

Kabul

Karachi

Delhi

Dhaka

Yangon

Bangkok

Kuala Lumpur

Hong Kong

Beijing

Perth

Tokyo

Adelaide

Sydney

Noumea

Wellington

–11.0

–10.0

–09.0

–08.0

–07.0

–06.0

–05.0

–04.0

–03.0

–01.0

+00.0

+01.0

+02.0

+03.0

+03.5

+04.0

+04.5

+05.0

+05.5

+06.0

+06.5

+07.0

+08.0

+09.0

+09.5

+10.0

+11.0

+12.0

Papeete

Nome

Las Vegas, San Francisco, Vancuouver, Seattle/Tacoma,

Dawson City

El Paso, Edmonton

Winnipeg, Houston, Dallas/Fort Worth, New Orleans

Montreal, Detroit, Boston, Miami, Panama City, Havana, Lima,

Bogota

La Paz, Santiago, Port Of Spain

Sao Paulo, Brasilia, Montevideo

Dublin, Casablanca, Dakar, Abidjan

Algiers, Hamburg, Frankfurt, Vienna, Barcelona, Milan

Beirut, Damascus, Cape Town, Johannesburg, Istanbul

Kuwait, Riyadh, Aden, Addis Ababa, Nairobi

Shiraz

Abu Dhabi, Muscat

Male

Mumbai, Kolkata, Colombo

Jakarta, Phnom Penh, Hanoi, Vientiane

Singapore, Taipei, Manila, Ulaanbaatar

Seoul, Pyongyang

Darwin

Guam, Melbourne, Rabaul

Port Vila

Christchurch, Nadi, Nauru Island

PPG

HNL

ANC

LAX

DEN

MEX

CHI

NYC

CCS

RIO

BUE

RAI

LIS

LON

MAD

PAR

AMS

MCM

ROM

BER

PRG

STO

ATH

ANK

NIC

HEL

CAI

JRS

MOW

JED

DOH

THR

DXB

KBL

KHI

DEL

DAC

RGN

BKK

KUL

HKG

BJS

PER

TYO

ADL

SYD

NOU

WLG

*Based on data as of December 2006.

Casio 3095 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3095

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info