Bedienungsanleitung Casio 3185 - GF-1000 (Seite 2 von 8) (Englisch)

624494

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Operation Guide 3185

E-10

General Guide

• Press C to change from mode to mode.

• Holding down C for about one second in any mode switches directly to the Diving

Mode. Holding down C for about one second in the Diving Mode switches to the

Timekeeping Mode.

• In any mode (except when a setting screen is on the display),

press B to illuminate the display.

Hold down C.

▲

Diving Mode

Timekeeping Mode

▲

Press C.

E-11

▲

Diving Log Recall Mode Tide/Moon Data Mode

Countdown Timer Mode Stopwatch Mode Alarm Mode

World Time Mode

▲

E-12

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• Press A to toggle between the day of the week and date (Date screen), and the

currently selected World Time city and time (Dual Time).

Date Screen

PM indicator

Hour : Minutes Seconds

Day of week

Dual Time Screen

Dual timeCity code

Month – Day

▲

E-13

Read This Before You Set the Time and Date!

This watch is preset with a number of city codes, each of which represents the time

zone where that city is located. When setting the time, it is important that you first

select the correct city code for your Home City (the city where you normally use the

watch). If your location is not included in the preset city codes, select the preset city

code that is in the same time zone as your location.

• Note that all of the times for the World Time Mode city codes (page E-36) are

displayed in accordance with the time and date settings you configure in the

Timekeeping Mode.

To set the time and date

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Use D and B to select the city code you want.

• Make sure you select your Home City code before

changing any other setting.

• For full information on city codes, see the “City Code

Table” at the back of this manual.

E-14

Change the city code

Toggle between Daylight Saving Time (

ON)

and Standard Time (

OFF).

Use D (east) and B

(west).

Press D.

Screen:

To do this: Do this:

3. Press C to move the flashing in the sequence shown below to select the other

settings.

Seconds

12/24-Hour

Format

Hour

Minutes

DST

Month

Year

City Code

DayPower Saving

Illumination

Duration

Button

Operation Tone

4. When the timekeeping setting you want to change is flashing, use D or B to

change it as described below.

E-15

Screen: To do this: Do this:

Toggle between 12-hour ( ) and 24-

hour ( ) timekeeping

Reset the seconds to

Change the hour and minutes

Change the year, month, or day

Toggle the button operation tone between

(on) and (off)

Toggle the illumination duration between

(approximately 1.5 seconds) and

(approximately 3 seconds).

Toggle between Power Saving on (

) and

off (

)

Press D.

Use D (+) and B (–).

Press D.

E-16

5. Press A to exit the setting screen.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

12-hour and 24-hour timekeeping

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-17

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Press C and the DST setting screen appears.

3. Use D to toggle the DST settings in the sequence

shown below.

DST off (

OFF

) DST on (

)

4. When the setting you want is selected, press A to exit the setting screen.

• The DST indicator appears to indicate that Daylight Saving Time is turned on.

DST indicator

E-18

Using the Diving Mode

You can use the Diving Mode to keep log records of the duration of each of your dives.

Each log record includes a log number, the dive time, and the dive start date and time.

There is enough memory to hold up to 10 diving log records. You can use the Diving

Log Recall Mode to display diving log records currently in memory (page E-24).

• Use C to enter the Diving Mode as shown under “General Guide” on page E-10.

• If you leave the watch in the Diving Mode for about 11 to 12 hours, it will

automatically switch to the Timekeeping Mode.

E-19

Graphic Area

• The Dive Graph indicates the current dive time in minutes. While a dive time

measurement operation is in progress, the current minute of the dive flashes in the graph.

• The Dive Graph time does not include interval time (page E-20).

Diving Mode Screens

Dive Time Measurement

Reset Screen

Mode name

Current timeDive time (hours,

minutes, seconds)

Ongoing Dive Time

Measurement Screen

Dive start time

Current timeDive time (hours,

minutes, seconds)

Dive Graph

Casio 3185 - GF-1000 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info