Bedienungsanleitung Casio 3269 - GR-8900 (Seite 3 von 6) (Englisch)

624516

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Operation Guide 3269

E-20

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

• To set a daily alarm, display alarm screen AL1, AL2, AL3 or AL4. To set the

snooze alarm, display the

SNZ screen.

• The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

• This operation turns on the alarm automatically.

E-21

3. Press C to move the flashing in the sequence shown below.

Hour Minutes

4. Use D (+) and B (–) to change the hour and minutes.

• With the 12-hour format, set the time correctly as a.m. or p.m. (P indicator).

5. Press A to exit the setting screen.

E-22

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, until you turn the alarm off (page E-23).

• Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode time.

• To stop the alarm tone after it starts to sound, press any button.

• Performing any one of the operations below during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-11)

Displaying the

SNZ

setting screen (page E-23)

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

E-23

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

2. Press B to toggle it on and off.

• Turning on a alarm (

AL1, AL2, AL3, AL4 or

SNZ) displays the alarm on indicator ( ) on its Alarm

Mode screen.

• In all modes, the alarm on indicator is shown for any

alarm that is currently turned on.

• The alarm on indicator flashes and graphic rotates while

the alarm is sounding.

• The snooze alarm indicator (

) flashes and graphic

rotates while the snooze alarm is sounding and during

the 5-minute intervals between alarms.

Alarm on

indicator

Snooze alarm

indicator

ONGraphic Area

E-24

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal (

SIG).

2. Press B to toggle it on and off.

• The Hourly Time Signal on indicator (

) is shown on

the display in all modes while this function is turned on.

Hourly time signal

on indicator

E-25

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

• The display range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C (page

E-9).

1/100 second

Hours

Minutes

Seconds

E-26

Start

Stop Re-start ClearStop

Split

(SPL displayed)

Split release ClearStop

Split

First runner

finishes.

Display time of

first runner.

Stop

Second runner

finishes.

ClearSplit release

Display time of

second runner.

Two Finishes

To measure times with the stopwatch

Elapsed Time

Split Time

➤➤➤➤

E-27

Countdown Timer

You can set the countdown timer within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

C (page E-9).

Hours

Minutes

Seconds

E-28

To configure the countdown timer

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down A until the current

countdown start time starts to flash, which indicates the

setting screen.

• If the countdown start time is not displayed, use the

procedure under “To use the countdown timer” (page

E-29) to display it.

2. Press C to move the flashing in the sequence shown below.

Hours Minutes

3. Use D (+) and B (–) to change the Hours and Minutes.

• To specify a countdown start time of 24 hours, set

4. Press A to exit the setting screen.

E-29

To use the countdown timer

Press D while in the Countdown Timer Mode to start the

countdown timer.

• The countdown timer operation continues even if you

exit the Countdown Timer Mode.

• Press D while a countdown operation is in progress to

pause it. Press D again to resume the countdown.

• To stop a countdown operation completely, first pause it

(by pressing D), and then press B. This returns the

countdown time to its starting value.

Countdown End Beeper

The countdown end beeper lets you know when the countdown reaches zero. The

beeper stops after about 10 seconds or when you press any button.

Seconds

Current timer time

Timer start time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 3269 - GR-8900 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3269 - GR-8900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info