Bedienungsanleitung Casio 3281 (Seite 7 von 11) (Englisch)

624496

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Operation Guide 3261 3281

E-60

4. Use

(+) and

(–) to change the displayed calibration by 0.1°C (0.2°F) steps.

• To return the currently flashing value to its initial factory default setting,

press

and

at the same time. OFF will appear in place of the flashing

temperature value for about one second, followed by the initial default value.

5. Press

to return to the Digital Compass/Thermometer Mode screen, and then

take direction and temperature readings.

Thermometer Precautions

• Temperature measurements are affected by your body temperature (while you are

wearing the watch), direct sunlight, and moisture. To achieve a more accurate

temperature measurement, remove the watch from your wrist, place it in a well

ventilated location out of direct sunlight, and wipe all moisture from the case. It

takes approximately 20 to 30 minutes for the case of the watch to reach the actual

surrounding temperature.

E-61

Specifying Temperature Unit

Use the procedure below to specify the temperature unit to be used in the Digital

Compass/Thermometer Mode.

Important!

When

TOKYO

is selected as the Home City, the

temperature unit is set automatically to Celsius (

°C

These settings cannot be changed.

To specify temperature unit

1. In the Timekeeping Mode, hold down

until

SET

starts to flash and the city name starts to scroll on the

display.

• This is the setting screen.

E-62

2. Press

as many times as necessary until

TEMP

is displayed.

• See step 3 under “To change the current time and date settings” (page E-29)

for information about how to scroll through setting screens.

3. Press

to toggle the temperature unit between

°C

(Celsius) and

°F

(Fahrenheit).

4. After the setting is the way you want, press

to exit the setting screen.

E-63

Temperature Reading Precautions

When taking temperature readings, it is best to remove the watch from your wrist in

order to eliminate the effects of body heat. Remove the watch from your wrist and

allow it to hang freely from your bag or in another location where it is not exposed to

direct sunlight.

E-64

Using the Moon Data

In the Moon Data Mode, you can see the current date’s Moon phase for your Home

City. You can specify a date and view Moon data for that date.

To enter the Moon Data Mode

Use

to select the Moon Data as shown on page E-22.

• About one second after

MOON

appears on the display,

the display will change to show the moon age.

Note

• Moon age is calculated to an accuracy of ±1 day.

Moon phase

Moon age

Month – Day

Moon phase

Moon age

Month – Day

E-65

Moon Data

The Moon phase and Moon age information that appears first when you enter the

Moon Data Mode shows the data at noon for your currently selected Home City on the

current date, according to the Timekeeping Mode. After that you can specify another

date to view data.

• If the Moon data is not correct, check your Timekeeping Mode settings and correct

them if necessary.

• The Moon phase is displayed in the Timekeeping Mode, and the Moon Data Mode.

• If the Moon phase indicator shows a phase that is a mirror image of the actual

moon phase in your area, you can use the procedure under “Reversing the

Displayed Moon Phase” (page E-66) to change it.

• Use the Moon Data Screen to specify the Moon Data date. You can use

(+) to

change the displayed date in one-day increments. Pressing

will display the year

of the displayed date.

E-66

Reversing the Displayed Moon Phase

The left-right (east-west) appearance of the Moon depends on whether the Moon is

north of you (northerly view) or south of you (southerly view) as you view it.

You can use the procedure below to reverse the displayed Moon phase so it matches

the actual appearance of the Moon where you are located.

• To determine the viewing direction of the Moon, use a compass to take a direction

reading of the Moon at its meridian passage.

• For information about the Moon phase indicator, see “Moon Phase Indicator” (page

E-68).

E-67

To reverse the displayed Moon phase

1. In the Moon Data Mode, hold down

until the Moon

phase indicator starts to flash.

• This is the indicator switching screen.

2. Press

to toggle the Moon phase indicator between

the southerly view (indicated by

) and northerly

view (indicated by

• Northerly view: Moon is north of you.

• Southerly view: Moon is south of you.

3. When the Moon phase indicator setting is the way you

want, press

to exit the switching screen and return

to the Moon Data Mode screen.

E-68

Moon Phase Indicator

The Moon phase indicator of this watch indicates the

current phase of the Moon as shown below. It is based on

the view of the left side of the moon at meridian transit

from the northern hemisphere of the Earth. If the

appearance of the Moon phase indicator is reversed from

the actual Moon as viewed from your location, you can

use the procedure under “To reverse the displayed Moon

phase” (page E-67) to change the indicator.

Module 3261

Module 3281

Moon Phase Indicator

Module 3261

Module 3281

Moon Phase Indicator

E-69

Moon

Phase

Indicator

Moon Phase

Moon Age

Module

3261

Module

3281

1.0-2.7

2.8-4.6

4.7-6.4 6.5-8.3 8.4-10.1

10.2-12.0 12.1-13.8

New

Moon

First

Quarter

(Waxing)

28.7-29.8

0.0-0.9

(part you cannot see) Moon phase (part you can see)

Casio 3281 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3281

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info