Bedienungsanleitung Casio 3796 (Seite 4 von 4) (Englisch)

586687

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Operation Guide 3796

Tide Graph

The tide graph uses arrows like those shown below to indicate the tide at the currently

displayed time. The current tide is indicated by the arrow that has a tail.

Low TideHigh TideLow Tide

(Falling Tide)

(Rising Tide)

Tidal Movements

Tides are the periodic rise and fall of the water of oceans, seas, bays, and other

bodies of water caused mainly by the gravitational interactions between the Earth,

Moon and Sun. Tides rise and fall about every six hours. The tide graph of this watch

indicates tidal movement based on the Moon’s transit over a meridian and the lunitidal

interval. The lunitidal interval differs according to your current location, so you must

specify a lunitidal interval in order to obtain the correct tide graph readings.

• The tide graph displayed by this watch is based on the current Moon age.

Remember that the margin for error of the Moon age displayed by this watch is ±1

day. The greater the error in a particular Moon age, the greater the error in the

resulting tide graph.

Lunitidal Interval

Theoretically, high tide is at the Moon’s transit over the meridian and low tide is about

six hours later. Actual high tide occurs somewhat later, due to factors such as

viscosity, friction, and underwater topography. Both the time differential between the

Moon’s transit over the meridian until high tide and the time differential between the

Moon’s transit over the meridian until low tide are known as the “lunitidal interval”.

When setting the lunitidal interval for this watch, use the time differential between the

Moon’s transit over the meridian until high tide.

Button Operation Tone

The button operation tone sounds any time you press one

of the watch’s buttons. You can turn the button operation

tone on or off as desired.

• Even if you turn off the button operation tone, the alarm,

Hourly Time Signal, and Countdown Timer Mode alarm

all operate normally.

To turn the button operation tone on and off

In any mode (except when a setting screen is on the

display), hold down C to toggle the button operation tone

on (

not displayed) and off ( displayed).

• Holding down C to turn the button operation tone on or

off also causes the watch’s current mode to change.

• The

indicator is displayed in all modes when the

button operation tone is turned off.

Site/Lunitidal Interval Data List

Auto Return Features

• If you leave a screen with flashing digits on the display for two or three minutes

without performing any operation, the watch automatically exits the setting screen.

• If you leave the watch in the Moon/Tide Data, Alarm or Hand Setting Mode for two or

three minutes without performing any operation, it automatically changes to the

Timekeeping Mode.

Scrolling

The B and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls through the data at high speed.

Timekeeping

• Resetting the seconds to

while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to

without changing the minutes.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

Illumination Precautions

• Illumination may be hard to see when viewed under direct sunlight.

• Illumination automatically turns off whenever an alarm sounds.

• Frequent use of illumination runs down the battery.

Anchorage –9.0 –8.0 149°W 5:40

Bahamas –5.0 –4.0 77°W 7:30

Baja, California –7.0 –6.0 110°W 8:40

Bangkok +7.0 +8.0 101°E 4:40

Boston –5.0 –4.0 71°W 11:20

Buenos Aires –3.0 –2.0 58°W 6:00

Casablanca +0.0 +1.0 8°W 1:30

Christmas Island +14.0 +15.0 158°W 4:00

Dakar +0.0 +1.0 17°W 7:40

Gold Coast +10.0 +11.0 154°E 8:30

Great Barrier Reef, Cairns +10.0 +11.0 146°E 9:40

Guam +10.0 +11.0 145°E 7:40

Hamburg +1.0 +2.0 10°E 4:50

Hong Kong +8.0 +9.0 114°E 9:10

Honolulu –10.0 –9.0 158°W 3:40

Jakarta +7.0 +8.0 107°E 0:00

Jeddah +3.0 +4.0 39°E 6:30

Karachi +5.0 +6.0 67°E 10:10

Kona, Hawaii –10.0 –9.0 156°W 4:00

Lima –5.0 –4.0 77°W 5:20

Lisbon +0.0 +1.0 9°W 2:00

London +0.0 +1.0 0°E 1:10

Los Angeles –8.0 –7.0 118°W 9:20

Maldives +5.0 +6.0 74°E 0:10

Manila +8.0 +9.0 121°E 10:30

Mauritius +4.0 +5.0 57°E 0:50

Melbourne +10.0 +11.0 145°E 2:10

Miami –5.0 –4.0 80°W 7:30

Noumea +11.0 +12.0 166°E 8:30

Pago Pago –11.0 –10.0 171°W 6:40

Palau +9.0 +10.0 135°E 7:30

Panama City –5.0 –4.0 80°W 3:00

Papeete –10.0 –9.0 150°W 0:10

Rio De Janeiro –3.0 –2.0 43°W 3:10

Seattle –8.0 –7.0 122°W 4:20

Shanghai +8.0 +9.0 121°E 1:20

Singapore +8.0 +9.0 104°E 10:20

Sydney +10.0 +11.0 151°E 8:40

Tokyo +9.0 +10.0 140°E 5:20

Vancouver –8.0 –7.0 123°W 5:10

Wellington +12.0 +13.0 175°E 4:50

UTC Differential

Lunitidal

Site Standard DST/ Longitude

Interval

Time Summer Time

*Based on data as of 2003.

Casio 3796 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3796

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info