Operation Guide 5081
3
W
World
48 cities (29 time zones) around the world.
operation swaps y
selected World Time City
• The times kept in the
synchronized with the time being kept in the
Timekeeping Mode.
any
have the correct city selected as y
check to make sure that the current time as sho
the
• Times in the
offsets.
the UTC offsets that are supported.
• All of the operations in this section are perf
you enter bC.
Currently selected
World Time City
World Time
▲
Press A.
One second
Hour
Minutes
T
In the WD to scroll through availab
Holding down the button scrolls at high speed.
• The lower left displa
• Between the noon and midnight in the PM )
appears above the hour digits in the lo
• When the city code (time zone) you wA to display
the date.
currently selected city
Seconds
Date
PM indicator
T
1. In the WD to displa
code (time zone) whose Standard
Time setting you want to change
2. Hold down A for about three seconds to toggle
between DaDST indicator
displayDST indicator not
display
• The DST indicator is shown in the low
while Daylight Sa
• Y
except UTC
• T
selected as your Home City will turn on DST for normal
timekeeping.
DST indicator
Swapping your Home City and
Y
changes your Home City to your
Home City
cities in different time zones
T
1. In the World D to select the World
2. Hold down A and B until the watch beeps.
• This will mak
the hour and minute hands to mov
it will change the Home City you had selected prior to step 2 y
and cause the content of lower left displa
• After swapping the Home City and
Time Mode with the city that was selected as the Home City prior to step 2 now
display
Alarms
When an alarm is tur
when its alarm time is reached. One of the alarms is a
snooze alarm, while the other four are daily alarms.
Y
the watch to beep twice e
• There are five alarm screens numbered
AL1, AL2,
AL3 and AL4 for the daily alarm, and a snooze alarm
screen indicated by
SNZ.
screen is indicated by
SIG.
• All of the operations in this section are perf
Alarm Mode, which you enter by pressing C.
Alarm number
Alarm time
(Hour
Minutes)
T
1. In the Alarm Mode, use D to scroll through the alarm
screens until the one whose time you want to set is
display
• TAL1 ,
AL2, AL3 or AL4.
display the
SNZ screen.
•
SIG is the hourly time signal setting.
• The snooze alarm repeats ev
2. After you select an alarm, hold down A for about three seconds until the hour
setting of the alarm time star
• This operation turns on the alarm automatically
3. Press C to move the flashing between the hour and minute settings
4. While a setting is flashing, use D (+) and B (–) to change it.
5. Press A to exit the setting mode.
OFF
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in.
of sev
• Alarm and Hourly Time Signal operations are perf
current time in your Home City
• T
• P
snooze alarms cancels the current snooze alarm operation.
Displaying the
Displaying the
SNZ
setting
T
1.D to select an alarm.
2.A to toggle it on and off.
• T
AL1, AL2, AL3, AL4 or
SNZ) displays the alarm on indicator on its Alarm
Mode screen.
• In all modes, the alarm on indicator is shown f
alarm that currently is tur
• The alarm on indicator flashes while the alarm is
sounding.
• The snooze alarm indicator flashes while the snooze
alarm is sounding and dur
between alarms.
Alarm on
indicator
Snooze
alarm
indicator
ON
T
1.D to select the Hourly Time
Signal (
SIG).
2.A to toggle it on and off.
• The Hourly
display in all modes while this function is turned on.
Hourly time signal
on indicator
ON
Illumination
An LED (light-emitting diode) illuminates the f
watch f
switch turns on illumination automatically when you angle
the watch tow
• The auto light s
the auto light switch indicator) f
• See
information about using illumination.
T
In any mode, press B to turn on illumination.
• The above oper
the current auto light switch setting.
• Y
seconds or 3 seconds as the illumination duration.
you press B , the illumination will remain on f
1.5 seconds or 3 seconds, depending on the current
illumination duration setting.
Auto light switch
indicator
T
1. In the A until the
display contents start to flash.
2. Press C nine times to displa
duration LT (
LT1) or LT (LT3).
3. Press D to toggle the setting between
LT1(1.5
seconds) and
LT3 (three seconds).
4. Press A to exit the setting screen.
About the Auto Light Switch
T
your wrist as described below in any mode.
Moving the watch to a position that is parallel to the g
you more than 40 degrees causes illumination to turn on.
• Wear the watch on the outside of y
Par
ground
More than
40°
Warning!
•
•
• Always make sure y
display of the watch using the auto light s
running or engaged in any other activity that can result in accident or injury
Also take care that sudden illumination b
startle or distract others around y
•
•
• When you are wearing the watch,
off before riding a bicyc
vehicle.
distraction, whic
T
In the B for about three seconds to toggle the auto
light switch on (auto light s displayed) and off (auto light s
not display
• The auto light switch indicator remains in all modes while the auto light s
turned on.
• In order to protect against running down the battery
automatically approximately six hours after y
procedure to turn the auto light switch back on if y
