Bedienungsanleitung Casio 5240 (Seite 5 von 9) (Englisch)

607041

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Operation Guide 5240

E-49

Important!

When

x TYO (TOKYO) is selected as the Home City, the temperature unit is set

automatically to Celsius (°C). These settings cannot be changed.

If you do not perform any operation with the crown for about two minutes after

pulling it out, crown operations will become disabled and the watch hands will no

longer move when you rotate the crown. If this happens, push the crown back in

and then pull it out again.

Correcting the Temperature Reading

The temperature sensor of this watch is adjusted at the factory and so further

adjustment is not required by you. However, if you notice that the readings produced

by the watch are different from readings produced by another instrument, you can use

the procedure in this section to make corrections. You also can use this procedure to

clear a correction.

E-48

Measurement unit: 1°C (or 2°F)

Measurement range*: –10 to 60°C (or 14 to 140°F)

If a reading produces a value that is outside the measurement range, the *

Hour

Hand,

Second Hand,

Minute Hand, and

Upper Dial Hand all point to 11.

If you have performed correction of the temperature reading (page E-49), canceling

the correction may cause a reading to be outside the measurement range.

To switch a temperature reading unit between Celsius (°C) and Fahrenheit (°F)

While the hands are indicating a temperature reading, pull out the crown.1.

Hold down 2. A for about two seconds.

This will toggle the temperature reading unit between Celsius (°C) and

•

Fahrenheit (°F), causing the

Hour Hand,

Second Hand,

Minute Hand,

and

Upper Dial Hand to move accordingly.

Push the crown back in.3.

After about ten seconds, the watch will resume regular timekeeping.

•

E-47

Fahrenheit (°F)

Hour Hand and

Upper Dial Hand: Indicate the hundreds digit.

Second Hand: Indicates the ones digit.

Minute Hand: Indicates the tens digit.

Lower Dial Hand: Points to the day of the week.

To take a temperature reading

Enter the Timekeeping Mode (page E-32).1.

Press 2. A.

First the

•

Second Hand and then the

Hour Hand,

Minute Hand, and

Upper Dial Hand move to indicate the temperature reading.

Pressing

• A again while the hands are indicating a temperature reading will take

another reading.

To cancel an ongoing temperature measurement operation, press

• B or C.

About 10 seconds after the hands move to indicate a temperature reading, they •

will go back to regular timekeeping automatically.

E-46

Thermometer

This watch uses a temperature sensor to take temperature readings.

You can select either Celsius (°C) or Fahrenheit (°F) as the temperature •

measurement unit (page E-48).

Hands and Indicators

Celsius (°C)

Hour Hand and

Upper Dial Hand:

Indicate the tens digit.

Second Hand: Indicates temperature is above

zero (+°C) or below zero (–°C).

Minute Hand: Indicates the ones digit.

Lower Dial Hand: Points to the day of the

week.



* +

2 (tens digit)

4 (ones digit)

Example: 24°C

°C (Above zero)2

(tens digit)

E-45

After the settings are the way you want, push the crown back in to return to the 9.

Timekeeping Mode.

This causes timekeeping to resume with the

Second Hand starting from

12 o’clock.

Note

The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the day, there should be no reason to change

it except after you have the watch’s rechargeable battery replaced or after power

drops to Level 3.

E-44

Rotate the crown to adjust the year setting.8.

If you want to change the time setting at this time, press

x C and then perform

the procedure starting from step 4 under “To change the current time setting

manually” (page E-39).

Year setting (ones digit)

Year setting (tens digit)

5070

E-43

After the 5.

Day Indicator stops moving, press

C. This will enter the month setting mode.

The

Second Hand will move to the

currently selected month.

Rotate the crown to adjust the month setting.6.

Press 7. C. This will enter the year setting

mode.

The

Hour Hand will move to the number

that represents the tens digit of the year

and the

Minute Hand will move to the

number that represents the ones digit. The

Second Hand will move to 12 o’clock and

stop there.

Dec

Nov

Feb

Mar

Apr

Oct

Sep

Aug

Jan

Jul May

Jun

Setting the month

E-42

To change the current day setting manually

Pull out the crown.1.

This will cause the

Second Hand to move to the city

code of the currently selected Home City.

Hold down 2. C for about one second until the watch

beeps and the

Second Hand moves to 12 o’clock.

This indicates the manual time setting mode.

Press 3. C twice. This will enter the day setting mode.

The x

Day Indicator will move slightly to indicate the

setting mode.

Rotate the crown to adjust the day setting.4.



E-41

Rotate the crown to adjust the time (hour and minute) setting.4.

See “Using the Crown” (page E-3) for information about high-speed hand

movement.

The x

Upper Dial Hand is synchronized with the

Hour Hand.

When adjusting the setting, check to make sure that the x

Upper Dial Hand

correctly indicates an a.m. time or p.m. time.

If you want to change the day setting at this time, press

x C and perform the

procedure starting from step 3 under “To change the current day setting

manually” (page E-42).

After the settings are the way you want, push the crown back in to return to the 5.

Timekeeping Mode.

This causes timekeeping to resume with the

Second Hand starting from

12 o’clock.

E-40

Change the Home City settings, if you want.2.

For details about these settings, see steps 2 and 3 x

under “To conﬁ gure Home City settings” (page E-34).

Hold down 3. C for about one second until the watch

beeps and the

Second Hand moves to 12 o’clock.

This indicates the manual time setting mode.

In the following steps, each press of x C cycles

between settings as shown below.

Home city/DST

Hour/Minute Hour

Year DayMonth



+@>B

Casio 5240 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5240

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info