Bedienungsanleitung Casio 5338 - BA-112 (Seite 3 von 5) (Englisch)

624954

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Operation Guide 5338

E-20

To specify standard time or daylight saving time (DST) for a city

1. In the World Time Mode, use D (East) to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A for about two seconds.

 This toggles the city code you selected in step1

between Daylight Saving Time (DS T indicator

displayed) and standard time (DS T indicator not

displayed).

 You cannot use the World Time Mode to change the DST setting of the city

currently selected as your Home City in the Timekeeping Mode.

 Note that you cannot switch between standard time/daylight saving time (DST)

while UTC is selected as the World Time City.

 The standard time/daylight saving time (DST) setting affects only the currently

selected time zone. Other time zones are not affected.

DST indicator

E-21

Using the Alarm

You can set ﬁ ve independent daily alarms. When a

daily alarm is turned on, an alarm tone will sound

for about 20seconds each day when the time in the

Timekeeping Mode reaches the preset alarm time. One

of the alarms is a snooze alarm, while the other four

are one-time alarms. The snooze alarm operation will

repeat every ﬁ ve minutes, up to seven times.

You can also turn on an Hourly Time Signal, which will

cause the watch to beep twice every hour on the hour.

Alarm number

Alarm time (Hour : Minutes)

E-22

To enter the Alarm Mode

Use C to select the Alarm Mode as shown on page E-9.

 The snooze alarm screen is indicated by SNZ, while the other alarm screens are

numbered AL1 through AL4. The Hourly Time Signal screen is indicated by SIG.

 When you enter the Alarm Mode, the data you were viewing when you last exited

the mode appears ﬁ rst.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

AL1 AL3 SNZAL2 AL4 SIG

D D DD D

Alarm ON/OFF indicator

Alarm indicator

E-23

2. Hold down A for about two seconds until the alarm time starts to ﬂ ash. This is

the setting mode.

3. Press C to move the ﬂ ashing between the hour and minute settings.

4. While a setting is ﬂ ashing, use D (+) and B (–) to change it.

 When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting mode.

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

E-24

To turn an alarm and the Hourly Time Signal on and off

In the Alarm Mode, use D to select an alarm or the

Hourly Time Signal.

 When the alarm you want or the Hourly Time Signal

is displayed, press A to toggle it between on (“

”

displayed) and off (“

” displayed).

 The alarm on indicator (when any alarm is on), snooze

alarm indicator (when the snooze alarm is on), and the

Hourly Time Signal on indicator (when the Hourly Time

Signal is on) are shown on the display in all modes.

To stop the alarm

Press any button.

Hourly time signal

on indicator

Snooze alarm indicator

E-25

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two ﬁ nishes.

To enter the Stopwatch Mode

Use C to select the Stopwatch Mode as shown on

page E-9.

1/100 Seconds

Split

Seconds

Hours

Minutes

E-26

To perform an elapsed time operation

D D D A

Start Stop (Restart) (Stop) Reset

To pause at a split time

A A D A

Start Split

(SPL displayed)

Split release Stop Reset

To measure two ﬁ nishes

A D A A

Start Split

(SPL displayed)

First runner ﬁ nishes.

Display time of ﬁ rst

runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Reset

E-27

Note

 The Stopwatch Mode can indicate elapsed time up to 23hours, 59minutes,

59.99seconds.

 Once started, stopwatch timing continues until you press D to stop it, even if

you exit the Stopwatch Mode to another mode and even if timing reaches the

stopwatch limit deﬁ ned above.

 Exiting the Stopwatch Mode while a split time is frozen on the display clears the

split time and returns to elapsed time measurement.

E-28

Countdown Timer

The countdown timer can be set within a range of

one minute to 24hours. An alarm sounds when the

countdown reaches zero.

To enter the Countdown Timer Mode

Use C to select the Countdown Timer Mode as shown

on page E-9.

Seconds

MinutesHours

E-29

To conﬁ gure the countdown timer

1. While the countdown start time is on the display in

the Countdown Timer Mode, hold down A until the

current countdown start time starts to ﬂ ash, which

indicates the setting mode.

 If the countdown start time is not displayed, use the

procedure under “To perform a countdown timer

operation” (page E-30) to display it.

2. Press C to move the ﬂ ashing in the sequence shown

below to select other settings.

Start Time (hours) Start Time (minutes)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5338 - BA-112 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5338 - BA-112

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info