Bedienungsanleitung Casio 5338 - BA-112 (Seite 4 von 5) (Englisch)

624954

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Operation Guide 5338

E-30

3. Use D (+) and B (–) to change the hours and minutes settings.

 To count down from 24hours, set a start time of 0:00.

4. Press A to exit the setting mode.

To perform a countdown timer operation

D D D A

Start Stop (Restart) (Stop) Reset

 Before starting a countdown timer operation, check to make sure that a

countdown operation is not in progress (indicated by the seconds counting down).

If it is, press D to stop it and then A to reset to the countdown start time.

To stop the alarm

Press any button.

E-31

Adjusting the Analog Hand Setting

Use the following procedure to adjust the analog hands so their settings match the

digital time.

To adjust the analog time

1. In the Timekeeping Mode, hold down D for about

three seconds until the current time start to ﬂ ash. This

is the analog setting mode.

2. Press D to advance the analog time setting by

20seconds.

 Holding down D advances the analog time setting

at high speed.

E-32

 If you need to advance the analog time setting a long way, hold down D until

the time starts advancing at high speed, and then press B. This locks the high-

speed hand movement, so you can release the two buttons. High-speed hand

movement continues until you press any button. It will also stop automatically

after the time advances 12hours or if an alarm (daily alarm, Hourly Time Signal,

or countdown beeper) starts to sound.

3. Press A to exit the setting mode.

 The watch will automatically adjust the minute hand slightly to match its internal

second count when you exit the setting mode.

E-33

Illumination

The face of the watch is illuminated for easy reading in

the dark.

To turn on illumination

In any mode (except when a setting mode, with ﬂ ashing

digits is on the display), press B to illuminate the display.

Illumination Precautions

 Illumination may be hard to see when viewed under

direct sunlight.

 Illumination turns off automatically whenever an alarm

sounds.

 Frequent use of illumination runs down the battery.

E-34

Button Operation Tone

The button operation tone sounds any time you press one

of the watch’s buttons. You can turn the button operation

tone on or off as desired.

 Even if you turn off the button operation tone, alarms,

the Hourly Time Signal, and other beepers all operate

normally.

To turn the button operation tone on and off

Hold down C until the button operation tone sounds

(about 3seconds).

 This will toggle the button operation tone either ON or

OFF.

 The mute indicator is displayed while the button

operation tone is turned off (muted).

 The mute indicator is displayed in all modes when the

button operation tone is turned off.

Mute indicator

E-35

Troubleshooting

Time Setting

■ The current time setting is off by hours.

Your Home City setting may be wrong (page E-12). Check your Home City setting and

correct it, if necessary.

■ The current time setting is off by one hour.

You may need to change your Home City’s standard time/daylight saving time

(DST) setting. Use the procedure under “Adjusting the Digital Time and Date

Settings” (page E-15) to change the standard time/daylight saving time (DST) setting.

World Time Mode

■ The time for my World Time City is off in the World Time Mode.

This could be due to incorrect switching between standard time and daylight saving

time. See “To specify standard time or daylight saving time (DST) for a city” (page E-20)

for more information.

E-36

Main Indicators

Number Name See

Snooze alarm indicator E-24

Alarm indicator E-22

Hourly time signal on indicator E-24

PM indicator E-11

Mute indicator E-34

Split indicator E-25

DST indicator E-14

Graphic indicator

–

6 5

B

E-37

, Graphic indicator

Mode Indicator Meaning

Timekeeping

World Time

Alarm

Current second

Countdown Timer Timer seconds

Stopwatch Elapsed 1/10 seconds

E-38

Speciﬁ cations

Accuracy at normal temperature:

30 seconds a month

Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the

week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Home City code (can be assigned one of 48 city codes);

Standard Time/Daylight Saving Time (summer time)

Analog Timekeeping: Hour, minutes (hand moves every 20seconds)

World Time: 48 cities (29 time zones)

Other: Daylight Saving Time/Standard Time

Alarms: 5 daily alarms (with 1 snooze alarm); Hourly time signal

Stopwatch:

Measuring unit: 1/100 second

Measuring capacity: 23:59'59.99"

Measuring modes: Elapsed time, split time, two ﬁ nishes

E-39

Countdown Timer:

Measuring unit: 1 second

Countdown range: 24 hours

Countdown start time setting range: 1 minute to 24 hours (1-minute increments)

Illumination: LED (light-emitting diode)

Power Supply: Two silver oxide batteries (Type: SR726W)

Approximately 2 years on type SR726W (assuming alarm operation 20seconds

per day and one illumination operation 1.5seconds per day)

Frequent use of illumination runs down the battery.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5338 - BA-112 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5338 - BA-112

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info