Operation Guide 5369 (MTG)
E-23
To enter the Dual Time Mode, hold down C at least two seconds.
Hand Functions
z
x
c
v
b
n
m
,
.
x A causes the
Second Hand to move to the current Home City
for about one second.
x
Day Indicator will change gradually between approximately 10 p.m.
and 2 a.m. During this period the number indicating the day will not be
centered in the indicator window.
E-22
Dual Time Mode Stopwatch Mode
Alarm Mode Countdown Timer Mode
Indicates the day of the
week (SU /MO /TU /WE /TH /
FR/ SA).
Indicates the 1/20 (0.05)
second count.
Indicates ON or OFF . Indicates TR .
C
C
C
C
x C for at least two
seconds.
E-21
Your watch has four “modes”. The mode you should select depends on what you want to do.
Use C to cycle between modes.
To do this: Enter this mode: See:
x
x
x
x
Any Mode E-23
x
x
x
x
x
x
Dual Time Mode E-23
x
x
Stopwatch Mode E-35
Use the countdown timer Countdown Timer Mode E-39
Set an alarm time Alarm Mode E-42
E-20
4.
Second Hand to the setting you want.
x Y (YES ).
x N (NO ).
5.
Radio-controlled Atomic Timekeeping Precautions
x
x
to one second.
x
January 1, 2000 to December 31, 2099. Updating of the date by signal reception will no longer be
performed starting from January 1, 2100.
x
noted in “Specifi
x
−
−
−
x
E-19
To check the result of the latest receive operation
1. C for at least two seconds to enter the Dual Time Mode (page
E-23).
2. B .
x
Second Hand will move to Y (YES ) if the latest receive operation
was successful, or N (NO ) if it was not. After about ten seconds, regular
timekeeping will resume.
x
while the
Second Hand is pointing to Y (YES ) or N (NO ).
Note
x
Second Hand will indicate N (NO ) if you have adjusted the time or
date setting manually since the latest receive operation.
1. C for at least two seconds to enter the Dual Time Mode (page
E-23).
2. B .
3.
Second Hand is pointing to the latest
receive operation result (see above), pull out the crown to the fi
x
Second Hand to point to either Y (YES ) or N (NO ),
which indicates the current on/off setting.
x
performing any operation will automatically cause crown operations to
become disabled. If this happens, press the crown back in, pull it out,
and then start the operation over again.
N (NO)
Y (YES)
N (NO)
Y (YES)
E-18
1. C for at least two seconds to enter the Dual Time Mode (page E-23).
2. B for at least two seconds.
x
Second Hand will fiY (YES ) or N (NO ), and then
move to RC (R ) (Receive in progress) to indicate that signal reception has started.
3.
operation is successful.
Note
x
while a receive operation is in progress. Correct indication will resume after
the receive operation is complete. If you need to produce a correct time
reading immediately, press any button to stop the receive operation.
x
possible causes for failure and then try again. See “To get ready for a
receive operation” (page E-16).
N (NO)
Y (YES)
E-17
x
Inside or among
buildings
Inside a vehicle Near household
appliances,
offi
equipment, or a
mobile phone
Near a
construction
site, airport, or
other sources of
electrical noise
Near high-
tension power
lines
Among
or behind
mountains
2.
x
x
x
(up to fi
receive operation is successful, none of the other receive operations for that day are performed.
x
−
−
−
−
E-16
x
day. Radio interference may also cause problems with reception.
−
−
−
−
x
Daylight Saving Time system in the future, some functions of this watch may no longer operate
correctly for the China time zones.
x
supports may result in incorrect time indication due to local application of summer time, etc.
1.
12 o’clock
or
x
with 12 o’clock pointed towards a window. Make sure
there are no metal objects nearby.
x
x
in some cases it can take as long as 20 minutes. Take
care that you do not perform any button operation or
move the watch during this time.
