Bedienungsanleitung Casio 5394 - OCW-P1000 (Seite 4 von 9) (Englisch)

624833

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Operation Guide 5394 (OC)

E-31

3. Hold down B for about one second until the watch beeps and the

Second Hand moves to 12 o’clock.

x This indicates the manual time setting mode.

x In the following steps, each press of B cycles between settings as

shown below.

Home city/DST

Hour/Minute Hour

Year DayMonth

4. Rotate the crown to adjust the time (hour and minute) setting.

x See “Using the Crown” (page E-4) for information about high-speed hand movement.

x The

Upper Dial Hand is synchronized with the

Hour Hand.

x When adjusting the setting, check to make sure that the

Upper Dial Hand correctly indicates an

a.m. time or p.m. time.

x If you want to change the day setting at this time, press B and perform the procedure starting from

step 3 under “To change the current day setting manually” (page E-32).

5. After the settings are the way you want, push the crown back in to exit the manual time setting mode.

x This causes timekeeping to resume with the

Second Hand starting from 12 o’clock.

x If you do not perform any operation with the crown for about two minutes after pulling it out, crown

operations will become disabled. If this happens, push the crown back in and then pull it out again.



 

E-30

Conﬁ guring Current Time and Day Settings Manually

You can conﬁ gure current time and day settings manually when the watch is unable to receive a time

calibration signal.

To change the current time setting manually

1. Pull out the crown.

x This will cause the

Second Hand to move to the city code of the

currently selected Home City.

2. Change the Home City settings, if you want.

x For details about these settings, see step 2 under “To conﬁ gure Home City settings” (page E-27).





TYO (TOKYO)

E-29

To switch between standard time and summer time manually

1. Perform steps 1 and 2 under “To conﬁ gure Home City settings” (page E-27).

x Selecting a city code will cause the

Hour Hand,

Minute Hand, and

Upper Dial Hand to

move automatically to the current time for the selected city code.

x If you will use the watch in a city that is not included in the city code list, select a city code that is in

the same time zone as your city.

x Displaying the Home City Settings screen will cause the

Lower Dial Hand to move to AUTO (auto

switching), STD (standard time), or DST (daylight saving time).

2. Hold down A for about one second to cycle through the summer time settings as shown below.

AUTO STD DST

3. After the setting is way you want, push the crown back in.



E-28

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time.

Remember that not all countries or even local areas use Daylight Saving Time.

x Note that you cannot switch between STD (standard time) and DST (daylight saving time) while UTC*

is selected as your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping. The reference point for

UTC is Greenwich, England.

STD/DST Switching

You can select summer time or standard time independently for each city. The initial default setting for all

cities is AUTO.

Normally you should use the AUTO setting because it automatically switches between summer time

and standard time. You should change the setting to STD (standard time) or DST (summer time) in the

following cases.

− When using a time of a location that is not included in the watch’s list of 29 cities

− When the preset AUTO standard time/summer time timing is incorrect for some reason

Summer Time Settings

AUTO

The watch automatically switches between standard time and daylight saving time in accordance

with the Summer Time Period shown in the “City Code Table” at the back of this manual.

STD The watch always shows standard time.

DST The watch always shows daylight saving time.

E-27

Conﬁ guring Home City Settings

The Home City is location where you will normally use the watch. You can choose from a selection of city

codes that represent 29 cities around the globe.

To conﬁ gure Home City settings

Note

x This watch does not have a city code that corresponds to Newfoundland.

1. Pull out the crown.

x This will cause the

Second Hand to move to the city code of the

currently selected Home City.

x This indicates the city code setting mode.

2. Rotate the crown to move the

Second Hand to the city code you want to

select as your Home City.

x Each time you select a city code, the

Hour Hand,

Minute Hand,

Upper Dial Hand and

Day Indicator move to the current time and

day for that city code.

x For details about city codes, see the “City Code Table” at the back of

this manual.

3. Push the crown back in to exit the city code setting mode.

x If you do not perform any operation with the crown for about two

minutes after pulling it out, crown operations will become disabled. If

this happens, push the crown back in and then pull it out again.





TYO (TOKYO)











E-26

Timekeeping

To enter the Timekeeping Mode, hold down B at least two seconds.

Hand Functions

Hour Hand

Second Hand

Minute Hand

Upper Dial Hand: Indicates the current hour in the Home City time in

24-hour format.

Lower Dial Hand: Points to the day of the week.

Day Indicator



 







E-25

Selecting a Mode

With this watch, everything starts from the Timekeeping Mode.

To determine the watch’s current mode

Check what the

Lower Dial Hand is indicating as shown under “To select a mode” (page E-25).

To select a mode

Each press of B will cycle between modes. The currently selected mode is indicated by the

Lower

Dial Hand.



Timekeeping Mode World Time Mode

Stopwatch ModeCountdown Timer Mode

Alarm Mode

To return to the Timekeeping Mode from any other mode

Hold down B for at least two seconds.

E-24

Mode Reference Guide

Your watch has ﬁ ve “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

x Conﬁ gure Home City and DST (daylight saving time) settings

x Perform a time calibration signal receive operation or view the last

receive result

x Change the Auto Receive on/off setting

x Conﬁ gure time and day settings manually

x Determine the direction of north

Timekeeping Mode

E-27

E-18

E-22

E-30

E-34

x View the current time in one of 29 cities around the globe

x Conﬁ gure World Time City and summer time settings

x Swap the Home City and World Time City

World Time Mode

E-44

E-45

E-47

Use the stopwatch to measure elapsed time Stopwatch Mode E-48

Use the countdown timer

Countdown Timer

Mode

E-50

x Set an alarm time

x Turn the alarm ON or OFF

Alarm Mode

E-52

E-54

Casio 5394 - OCW-P1000 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info