Bedienungsanleitung Casio 5470 - PRW-6100 (Seite 9 von 26) (Englisch)

624853

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Note

●

Normally the Compass Mode

indicates magnetic north. You can

also configure settings to indicate

true north.

Setting

Up for True North Readings

(Magnetic Declination Calibration)

Magnetic North and True North

●

After the initial reading is displayed,

the watch will continue to take

readings about every second for

about the next 60 seconds. The

watch

will return to the Timekeeping

Mode automatically about 60

seconds after you press (C).

●

Auto

Light will not illuminate the face

while a compass operation is in

progress.

●

If an alarm or other beeper sounds,

or if you turn on illumination by

pressing (L) while a compass

operation is in progress, the

compass operation will be

suspended momentarily. The

compass operation will resume

when the beeper stops or

illumination turns off.

●

Aligning a map with actual

surroundings (setting a map)

Setting a map means to align the map so the

directions indicated on it are aligned with the

actual directions of your location. Once you

set

a map, you can more easily get a grasp of

the relationship between map markings and

actual geographic contours. To set a map with

this watch, align north on the map with the

north indication of the watch. Once you set the

map, you can compare your bearing on the

map with your surroundings, which will help

you determine your current location and

destination.

●

Note

that map reading skills and experience

are required to determine your current

location and destination on a map.

Calibrating Compass

Readings

Calibrating Compass Readings

(Bidirectional Calibration)

Perform calibration whenever you notice the

watch’s compass readings are different from

those of another compass, or before setting

out on a climb or trek.

●

Note that accurate compass readings

and/or calibration will not be possible in an

area where strong magnetism is present.

Digital Compass Reading Precautions

Pull out the crown.

Crown

While

keeping the watch horizontal, press

(C).

This starts calibration of the first point,

which causes [o WAIT] to appear on the

display. If calibration is successful,

indicators

will appear on the display in the

following sequence: [OK] n [Turn 180°]

n [p 2].

Rotate

the watch 180 degrees, taking care

to be as exact as possible.

Press (C).

This starts calibration of the second point,

which causes [p WAIT] to appear on the

display. [OK] will appear on the display if

calibration is successful.

Push the crown back in to complete the

setting operation.

Note

●

[ERR] will appear if calibration fails

for some reason. If this happens,

restart the above procedure from

step 1.

Setting Up for True North Readings

(Magnetic Declination Calibration)

If you want the watch to indicate true north

instead

of magnetic north, you need to specify

the current magnetic declination direction

(east or west) and declination angle.

Magnetic North and True North

●

The magnetic declination angle value can

set in 1° (degree) units only. Use a value

that is closest to the angle you want to set.

Example: For an angle of 7.4°, set 7°.

Example: For an angle of 7°.4' (7 degrees,

40 minutes), set 8°.

Note

●

Magnetic

declination angles (east or

west) and angle degree values for

specific locations can be found on

geographic maps, mountain

climbing maps, and other maps that

include contour lines.

Pull out the crown.

Crown

Press (B).

Rotate the crown to change the magnetic

declination

direction and angle settings as

desired.

Setting range: 90° west to 90° east

[0° (OFF)]: Magnetic north

[E]: East declination (Magnetic north is

east of true north.)

[W]: West declination (Magnetic north is

west of true north.)

●

return the setting to [0° (OFF)], press

(A) and (C) at the same time.

Magnetic declination angle

Magnetic declination direction

Push the crown back in to complete the

setting operation.

Operation Guide 5470

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5470 - PRW-6100 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5470 - PRW-6100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info