Bedienungsanleitung Casio 5470 - PRW-6100 (Seite 10 von 26) (Englisch)

624853

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Magnetic North and True

North

There are actually two types of north:

magnetic north and true north.

Magnetic north: North indicated by the needle

of a compass

True north: Direction to the North Pole

As shown in the illustration below, magnetic

north and true north are not the same.

Earth

Magnetic north

True north

Note

●

The

north indicated on commercially

available maps is normally true

north.

Digital Compass Reading

Precautions

Location during Use

Taking readings near sources of strong

magnetism

can cause reading error. Keep the

watch away from the following types of items.

Permanent magnets (magnetic accessories,

etc.),

metal objects, high-voltage wires, aerial

wires, electrical household appliances (TVs,

computers, cellphones, etc.)

●

Note that correct direction readings are not

possible indoors, especially inside of

reinforced concrete structures.

●

Accurate

direction readings are not possible

in motor vehicles, on boats, on aircraft, etc.

Storage Location

Exposure of the watch to magnetism can

affect the accuracy of digital compass

readings. Keep the watch away from the

following types of items.

Permanent magnets (magnetic accessories,

etc.), metal objects, electrical household

appliances

(TVs, computers, cellphones, etc.)

Altitude Measurement

The watch takes altitude readings and

displays results based on air pressure

measurements taken by a built-in pressure

sensor.

Important!

●

The altitude readings displayed by

the

watch are relative values that are

calculated based on barometric

pressure measured by the watch’s

pressure sensor. This means that

barometric pressure changes due to

weather can cause altitude readings

taken at the same location to be

different. Also note that the value

displayed by the watch may be

different from the actual elevation

and/or sea level elevation indicated

for the area where you are located.

When using the watch’s altimeter

while mountain climbing, it is

recommended that you regularly

calibrate its readings in accordance

with local altitude (elevation)

indications.

Calibrating Altitude Readings

●

The altitude calibration value and

barometric pressure changes may

result in display of a negative value.

●

Check the information below to find

out about how to minimize

differences between readings

produced by the watch, and values

provided

by local altitude (elevation)

indications.

Altitude Reading Precautions

Getting ready

Enter the Altitude Mode.

Navigating Between Modes

Altimeter Mode

●

Entering the Altitude Mode starts altitude

readings.

Note

●

When you enter the Altitude Mode,

the second hand will indicate either

timekeeping seconds, or the

differential between altitude

measurements (whichever was

indicated the last time you were in

the Altitude Mode). You can toggle

the

second hand indication between

seconds and the measured value

differential by pressing (D).

Taking a Relative Altitude Reading

from Some Reference Point

Checking the Current

Altitude

Starting an altitude measurement operation

displays the altitude in your current location.

The watch takes altitude readings every

second for about the first three minutes. After

that,

it takes readings according to the watch’s

auto measurement interval setting.

●

Check

the information below to find out how

to configure the auto measurement interval.

Setting the Auto Measurement Interval

Note

●

To retrigger measurement, press

(A).

●

Measurement range: -700 m to

10,000 m (-2,300 to 32,800 feet)

(Measurement

unit: 1 meter (5 feet))

Note that calibrating altitude

readings will cause a change in the

measurement range.

●

[- - -] will appear for the measured

value if it is outside the allowable

range.

●

Press (B) to return to the

Timekeeping Mode.

Interpreting Altitude Graph Contents

50 m*

Current reading

6 readings ago

1 square (v) is 10 m.

Operation Guide 5470

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5470 - PRW-6100 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5470 - PRW-6100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info