Bedienungsanleitung Casio 5481 - BGA-185 (Seite 4 von 6) (Englisch)

624893

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Operation Guide 5481

E-39

Alarm indicator Hourly time signal indicator

To stop the alarm

Press any button.

E-38

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn an alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select an alarm or the Hourly Time Signal.

x Each press of D cycles between the alarm time screen and the hourly time

signal SIG setting screen.

2. Press A to toggle the displayed setting (alarm or hourly time signal) between

on and off.

x An alarm on indicator will be on the display whenever any one of the ﬁ ve alarms

is turned on. Turning on the hourly time signal causes its indicator to appear on

the screen.

E-37

3. Hold down A for about two seconds until the alarm time starts to ﬂ ash. This is

the setting mode.

x The hour and minute hands automatically move out of the way at this time (page

E-12).

4. Press C to move the ﬂ

ashing between the hour and

minute settings.

5. While a setting is ﬂ ashing, use D (+) and B (–) to

change it.

6. Press A to exit the setting mode.

Note

x If you do not perform any operation for about two

or three minutes in the Alarm Mode, the watch will

automatically return to the Timekeeping Mode.

Alarm time hour

E-36

Using the Alarm

You can set up to ﬁ ve different alarms.

The watch beeps for about 10 seconds when the alarm

time is reached. The hourly time signal causes the watch

to beep every hour on the hour.

To set an alarm time

1. Use C to navigate to the alarm mode (page E-11).

2. Press D to display the setting (AL1 through AL5, or

SIG) you want to change.

AL1

AL2

AL3

SIG

AL5

AL4

E-35

To perform a countdown timer operation

D D D A

Start Stop (Resume) (Stop) Reset

x Before starting a countdown timer operation, check to make sure that a

countdown operation is not in progress (indicated by the seconds counting down).

If it is, press D to stop it and then A to reset to the countdown start time.

To stop the alarm

Press any button.

E-34

To conﬁ gure the countdown timer

1. Hold down A for about two seconds until the hour

digits of the start time start to ﬂ ash.

x Press C to toggle the ﬂ ashing between the hours

and minutes.

x The hour and minute hands automatically move out of

the way at this time (page E-12).

x If the countdown start time is not displayed, use the

procedure under “To perform a countdown timer

operation” (page E-35) to display it.

2. Use D and B to change the setting of the ﬂ ashing digits (hours or minutes).

x You can set a start time in the range of 1 minute to 24 hours in 1-minute

increments.

3. Press A to exit the setting mode.

E-33

Countdown Timer

The countdown timer can be set within a range of

one minute to 24hours. An alarm sounds when the

countdown reaches zero.

To enter the Countdown Timer Mode

Use C to select the Countdown Timer Mode as shown

on page E-11.

Seconds

Minutes

Hours

E-32

Note

x You can use the above operation only while the stopwatch is reset to all zeros.

− If the result of a stopped or ongoing timing operation was left on the display the

last time the Stopwatch Mode was exited, pressing D above will display that

stopped or ongoing stopwatch operation.

E-31

Starting the Stopwatch while in the Timekeeping Mode

Use the procedure below to start a stopwatch elapsed time measurement while in

the Timekeeping Mode.

In the Timekeeping Mode, press D.

E-30

Note

x The Stopwatch Mode can indicate elapsed time up to 59minutes, 59.99seconds.

x Once started, stopwatch timing continues until you press D to stop it, even if

you exit the Stopwatch Mode to another mode and even if timing reaches the

stopwatch limit deﬁ ned above.

x Exiting the Stopwatch Mode while a split time is frozen on the display clears the

split time and returns to elapsed time measurement.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5481 - BGA-185 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5481 - BGA-185

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info