Bedienungsanleitung Casio 5481 - BGA-185 (Seite 5 von 6) (Englisch)

624893

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Operation Guide 5481

E-49

Countdown Timer:

Measuring unit: 1 second

Countdown range: 24 hours

Countdown start time setting range: 1 minute to 24 hours (1-minute increments)

Alarms: 5 daily alarms; Hourly time signal

Illumination: LED (light-emitting diode); Selectable illumination duration

(approximately 1.5 seconds or 3 seconds)

Other: Button operation tone on/off; Moving the Hands to View the Digital Display

Power Supply: Two silver oxide batteries (Type: SR726W)

Approximate battery operating time: 2 years under the following conditions:

x 1 illumination operation (1.5 seconds) per day

x Alarm: 10 seconds/day

Frequent use of illumination runs down the battery.

E-48

Speciﬁ cations

Accuracy at normal temperature: ±30 seconds a month

Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the

week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Home City code (can be assigned one of 48 city codes);

Standard Time/Daylight Saving Time (summer time)

Analog Timekeeping: Hour, minutes (hand moves every 20seconds)

Counter: 0 to 999

World Time: 48 cities (31 time zones)

Other: Daylight Saving Time/Standard Time

Stopwatch:

Measuring unit: 1/100 second

Measuring capacity: 59 minutes, 59.99 seconds

Measuring modes: Elapsed time, split time, two ﬁ nishes

E-47

Main Indicators

Number Name See

Modes E-10, E-11

PM indicator E-15

Hands shifted indicator E-13

Alarm indicator E-39

Hourly time signal indicator E-39

DST indicator E-18, E-26

4 5 6

2 3

E-46

Troubleshooting

Time Setting

■ The current time setting is off by hours.

Your Home City setting may be wrong (page E-16). Check your Home City setting and

correct it, if necessary.

■ The current time setting is off by one hour.

You may need to change your Home City’s standard time/daylight saving time

(DST) setting. Use the procedure under “Adjusting the Digital Time and Date

Settings” (page E-19) to change the standard time/daylight saving time (DST) setting.

World Time Mode

■ The time for my World Time City is off in the World Time Mode.

This could be due to incorrect switching between standard time and daylight saving

time. See “To specify standard time or daylight saving time (DST) for a city” (page E-26)

for more information.

E-45

3. Press D to toggle the setting between KEY (ON) and MUTE (OFF).

4. After all the settings are the way you want, press A to exit the setting screen.

E-44

Button Operation Tone

You can turn the button operation tone on or off as

desired.

x Even if you turn off the button operation tone, alarms,

the Hourly Time Signal, and other beepers all operate

normally.

To turn the button operation tone on and off

1. In the Timekeeping Mode, hold down A until ADJ

appears.

x This indicates the city code setting mode.

x The hour and minute hands automatically move out of

the way at this time (page E-12).

2. Press C nine times to display the button operation tone On/Off screen (page E-20).

The screen will show either KEY

or MUTE.

E-43

3. Press C.

x This enters the hour and minute hand adjustment

mode.

x Press C again* to return to the mode hand

adjustment mode.

* Nothing will happen if you press C while the hands

are moving.

4. If the hour and minute hands are not at 12 o’clock,

use D and B to adjust them until they are.

5. Press A to return to the Timekeeping Mode.

Check to make sure that the time indicated by the hands matches the time on the

digital display. If the times don’t match, perform the correction procedure above

again.

Hour hand and minute hand

E-42

Adjusting Hand Positions

The watch hands can go out of alignment with the time on the digital display if it

is exposed to strong magnetism or impact. If this happens, you should adjust the

hand positions.

Important!

x You do not need to perform the operation below as long as the analog hands

indicate the same time as the digital display.

1. In the Timekeeping Mode, hold down A for about ﬁ ve

seconds until H.SET appears.

x This indicates the mode hand adjustment mode.

x Though ADJ will appear as you hold down A, do not

release the button yet.

2. If the mode hand is not at 12o’clock, use D and B

to adjust until it is.

Mode hand

E-41

2. Press C 10 times to display the illumination duration

setting screen (page E-20).

The screen will show either LT1 or LT3.

3. Press D to toggle the illumination duration setting

between LT1 (1.5 seconds) and LT3 (3 seconds).

4. After all the settings are the way you want, press A to

exit the setting screen.

E-40

Illumination

The face of the watch is illuminated for easy reading in the dark.

To illuminate the face

In any mode (except a setting mode), press B to illuminate the face.

Illumination Precautions

x Illumination may be hard to see when viewed under direct sunlight.

x Illumination turns off automatically whenever an alarm sounds.

x Frequent use of illumination runs down the battery.

To change the illumination duration

1. In the Timekeeping Mode, hold down A until ADJ appears.

x This indicates the city code setting mode.

x The hour and minute hands automatically move out of the way at this time (page

E-12).

Casio 5481 - BGA-185 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5481 - BGA-185

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info