723237
53
Zoom out
Zoom in
Vorherige Seite
1/157
Nächste Seite
Using Auto Accompaniment (Rhythm Mode)
EN-52
1.
Hold down dp SPLIT until “Split Pt” is
displayed.
2.
Use the [1] (V) and [3] (W) bm number keys
to display “CdPrior”.
3.
Use bn [–] and [+] to switch the Chord Input
Priority Mode between on and off.
While Chord Input Priority Mode is turned on, the
LOWER part tone does not sound in the area where
the LOWER part keyboard and accompaniment
keyboard overlap.
4.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
One-Touch Preset gives you one-touch access to tone and
tempo settings that go well with the currently selected Auto
Accompaniment rhythm pattern.
1.
Hold down 6 RHYTHM until the tone name is
displayed.
This automatically applies the One-Touch Preset settings
in accordance with the rhythm pattern that is currently
selected.
2.
Play a chord on the keyboard.
This immediately starts Auto Accompaniment.
Auto Harmonize lets you add harmony to melody notes you
play with your right hand for more melodic depth. You can
select any one of 12 Auto Harmonize types.
A single button is used to control auto harmonize and the
arpeggiator (page EN-27). Because of this, the arpeggiator
cannot be used while auto harmonize is in use.
1.
Press do AUTO HARMONIZE/
ARPEGGIATOR and confirm that the [AUTO
HARMONIZE] indicator is displayed.
Fingering a chord on the accompaniment keyboard as
you play the melody on the UPPER part keyboard will
add chords to your melody play.
2.
To turn Auto Harmonize off, press do AUTO
HARMONIZE/ARPEGGIATOR.
This causes the [AUTO HARMONIZE] indicator to
disappear.
If the [ARPEGGIATOR] indicator is displayed instead of
the [AUTO HARMONIZE] indicator in step 1 of the
above procedure, you will need to change the function
assigned to the button.
Perform the procedure under “To configure function
settings with the bk FUNCTION button” (page EN-112)
and select “1 A.Har.” for the following setting: Auto
Harmonize/Arpeggiator (AHar/Arp) 3 AUTO
HARMONIZE/ARPEGGIATOR button assignment
(BtnAsign) (page EN-114).
1.
Perform the procedure under “To turn on Auto
Harmonize” and confirm that the [AUTO
HARMONIZE] indicator is displayed.
2.
Long-press do AUTO HARMONIZE/
ARPEGGIATOR until the [FUNCTION] indicator
flashes on the display.
This displays the currently selected auto harmonize
number and name.
3.
Use bn [–] and [+] or the bl dial to specify the
auto harmonize type.
For details about types, see “Auto Harmonize Type
List” (page EN-53).
To turn the Chord Input Priority Mode on or
off
Using Recommended Tones and
Tempos (One-Touch Presets)
Adding Harmony to Melody Notes
(Auto Harmonize)
To turn on Auto Harmonize
To select the Auto Harmonize type
Displayed
CTX5000_3000_EN.book 52 ページ 2018年2月26日 月曜日 午後3時56分
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio CT-X5000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Casio CT-X5000

Casio CT-X5000 Bedienungsanleitung - Deutsch - 155 seiten

Casio CT-X5000 Bedienungsanleitung - Holländisch - 155 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info