Bedienungsanleitung Casio CT-X5000 (Seite 55 von 157) (Englisch, Spanisch)

723237

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

EN-54

• With some music presets, selecting a number in step 3

causes the [SYNC START] indicator to start to flash,

indicating that the Digital Keyboard is in synchro start

standby (page EN-48). If this happens, Auto

Accompaniment can be started by playing something on

the keyboard instead of pressing ck START/STOP. For

information about operations that can be performed while in

synchro start standby, see step 1 under “To use Synchro

Start to start Auto Accompaniment play” (page EN-48).

• The accompaniment pattern operations (page EN-47) can

be used during a performance with a music preset.

• The operations below cannot be used during play that

employs a music preset.

– Rhythm setting change (page EN-43)

– Synchro stop (page EN-48)

– One-Touch Preset (page EN-52)

– Registration (page EN-67)

Perform the procedure under “To configure function settings

with the bk FUNCTION button” (page EN-112) and configure

the following setting: Other (Other) 3 Music preset key

change (MP Key) (page EN-117).

Each selection of a music preset automatically changes the

Digital Keyboard settings below. Changed settings are

maintained even after the Music Preset Mode is exited.

•Tempo

• Layer (on/off)

• Split (on/off)

• do AUTO HARMONIZE/ARPEGGIATOR button

assignment

• Auto Harmonize (on/off, type)

• Arpeggiator (on/off, type)

• Arpeggiator Hold (on/off)

• Tone number (UPPER 1, LOWER 1, UPPER 2, LOWER 2

parts)

• Octave Shift (UPPER 1, LOWER 1, UPPER 2, LOWER 2

parts)

• Reverb, Chorus, Delay (on/off, type)

Short phrases can be recorded and assigned to each of the

four phrase pads. Pressing a pad will loop playback its

recorded phrase. You can sound phrases individually, or you

can sound multiple phrases at the same time.

The explanations in this section refer to phrases assigned to

the phrase pads as Phrase 1 through Phrase 4.

■ Phrase Sets and Phrase Storage Locations

A group of four phrases assigned to the four phrase pads are

called a “phrase set”. There are 25 phrase sets numbered 1

through 25, which means that up to 100 phrases (25 phrase

sets with 4 phrases each) can be stored as user phrases.

When you record a phrase, you specify a storage location

using a phrase set number (1 to 25) and a phrase number 1 to

You can use the procedure below to change the phrase set

currently assigned to the phrase pads to another set.

Press bk FUNCTION.

Use the [1] (V) and [3] (W) bm number keys

to display “Phr Pad”, and then press [6]

(ENTER).

This displays “Phr Set”. You can select a phrase set

number at this time.

Use bn [–] and [+] or the bl dial to select a

phrase set number.

When the setting is the way you want, long-

press the [4] (EXIT) bm number key to exit the

setting screen.

To change the key of a chord progression

Settings Changed by Music Preset

Using Phrase Pads

Changing to Another Phrase Set

To change the phrase set

CTX5000_3000_EN.book 54 ページ２０１８年２月２６日　月曜日　午後３時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X5000 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CT-X5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info