Bedienungsanleitung Casio CT-X5000 (Seite 82 von 157) (Englisch, Spanisch)

723237

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

EN-81

Creating an Auto Accompaniment (User Rhythm)

• The operation shown here is performed as the steps of the

procedures below.

– Step 8 under “To create a totally new rhythm and save it”

(page EN-77)

– Step 8 under “To edit an existing rhythm and save it”

(page EN-79)

Press 8 RECORD/STOP.

This enters recording standby and displays “Recorded”

or “Empty”.

If “Fixed” is displayed here, it means that the currently

selected part cannot be recorded. After a few seconds,

the display will return to what was shown before you

pressed 8 RECORD/STOP.

• For details about these indicators, see “Part Data

Status Indicators” (page EN-82).

• To exit recording standby, press 8 RECORD/STOP.

This causes the [RECORD] indicator to disappear.

Configure recording settings as desired.

• The settings of recording items that you configured in

the past will still be in effect. Items you have not

changed will be configured with their default settings.

For details about setting items, see the “User Rhythm

Recording Settings” (page EN-82).

• To configure settings, perform the steps below.

(1) Long-press 8 RECORD/STOP until “Quantize”

appears.

(2) Use the [1] (V) and [3] (W) bm number keys to

display the menu for the changes you want to make.

(3) Use bn [–] and [+] or the bl dial to change the

setting value.

(4) When settings are the way you want, press the

8 RECORD/STOP again.

Practice what you will play as required.

• To sound the parts of the accompaniment pattern and

practice what you plan to play on the keyboard before

actually recording it, perform the procedure below.

(1) Long-press cm ACCOMP until the [ACCOMP]

indicator starts to flash.

This enters the Rehearsal Mode.

• The Rehearsal Mode causes the keyboard to

operate the same way as it does during recording,

without recording anything.

(2) Press ck START/STOP.

This plays back data that is already recorded to each

part of the accompaniment pattern.

• The bass part and chord parts 1 through 5 play in

the key of C Major. The key and the chord types

do not change even if you play something on the

accompaniment keyboard.

(3) Play on the keyboard in time with the playback.

Keyboard play will sound using the tone you selected

before entering recording standby.

(4) To exit the Rehearsal Mode, long-press

cm ACCOMP until the [ACCOMP] indicator

disappears from the display.

To start recording, press ck START/STOP.

• The message “Record..” also appears.

• The number of measures and beats are counted up in

the upper right corner of the display. When the final

beat of the length (number of measures) specified for

the accompaniment pattern is reached, the count

restarts from 001:01.

To record keyboard play to each part

Flashing

Displayed

Measure Beat

CTX5000_3000_EN.book 81 ページ２０１８年２月２６日　月曜日　午後３時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X5000 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CT-X5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info