Bedienungsanleitung Casio CT-X5000 (Seite 84 von 157) (Englisch, Spanisch)

723237

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

EN-83

Creating an Auto Accompaniment (User Rhythm)

• The operation shown here is performed as the steps of the

procedures below.

– Step 9 under “To create a totally new rhythm and save it”

(page EN-77)

– Step 9 under “To edit an existing rhythm and save it”

(page EN-79)

– Step 5 under “To configure only the mixer settings of an

existing rhythm and save it” (page EN-80)

Long-press 9 PART (MIXER) until the

[MIXER] indicator appears.

This displays the Part On/Off status of the part being

edited.

Use the [2] (w) and [5] (q) bm number keys to

display the menu item you want to change.

• Initial default setting values are indicated by an

asterisk (*).

*1 Only drum set tones can be selected for Drums and

Percussion parts. Drum set sounds cannot be selected for

the bass and the Chord 1 through Chord 5 parts.

Use bn [–] and [+] or the bl dial to change the

setting value.

When mixer settings are the way you want,

press the [4] (EXIT) bm number key.

In the Rhythm Editing Mode, select the copy

destination accompaniment pattern.

• Perform steps 1 to 3 under “To create a totally new

rhythm and save it” (page EN-77), or steps 1 to 3

under “To edit an existing rhythm and save it” (page

EN-79).

Press cs REGISTRATION [1].

This displays “Element”.

Press the [6] (ENTER) bm number key.

This displays the currently selected rhythm number and

rhythm name.

Use bn [–] and [+], or the bl dial to select the

number of the rhythm you want to use as the

source of the accompaniment pattern copy

operation.

Select the accompaniment pattern you want to

use as the copy source.

The indicator for the currently selected accompaniment

pattern (page EN-47) will flash.

* Each press of the button toggles between Variation and Fill-

in.

• Select an intro when the copy destination is an intro, or

an ending when the copy destination is an ending.

• When the copy destination is Variation 1 to 4, select

any one of Variation 1 to 4.

• When the copy destination is Fill-in 1 to 4, select any

one of Fill-in 1 to 4.

• Pressing ck START/STOP here starts looped

playback of the accompaniment pattern you selected

as the copy source.

To execute the copy operation, press [6]

(ENTER).

This displays “Sure?”

Press bn [+] (YES) to execute the copy

operation or bn [–] (NO) to cancel.

• The message “Wait...” remains on the display while

the copy operation is being performed. Do not perform

any operation while this message is on the display.

“Complete” appears on the display after the operation

is complete.

To configure mixer settings of a part being

edited

Item Name

(Display)

Description Settings

Part On/Off

(Part)

Specifies on/off for the

selected part.

On*, Off

Part tone

(Tone)

Specifies the tone of the

selected part.

Volume

(Volume)

Adjusts the volume level of

the selected part.

0 to 127*

Pan (Pan) Specifies the stereo pan

position of the selected

part. 0 indicates the center,

while a smaller value shifts

to the left and a larger

value shifts to the right.

–64 to 0* to 63

Reverb Send

(Rev Send)

Specifies how much reverb

is applied to the selected

part.

0 to 40* to 127

Chorus Send

(Cho Send)

Specifies how much

chorus is applied to the

selected part.

0* to 127

Delay Send

(Dly Send)

Specifies how much delay

is applied to the selected

part.

0* to 127

To copy an existing accompaniment pattern

for editing

To select this: Press this button:

Intro bo INTRO

Ending bt ENDING/SYNCHRO START

Variation 1 to 4,

Fill-in 1 to 4

bp VARIATION/FILL-IN 1 to

bs VARIATION/FILL-IN 4*

CTX5000_3000_EN.book 83 ページ２０１８年２月２６日　月曜日　午後３時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X5000 Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CT-X5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info