Bedienungsanleitung Casio CT-X5000 (Seite 86 von 157) (Englisch, Spanisch)

723237

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

EN-85

Creating an Auto Accompaniment (User Rhythm)

In the Rhythm Editing Mode, select the

accompaniment pattern whose parts you want

to batch clear.

• Perform steps 1 to 3 under “To edit an existing rhythm

and save it” (page EN-79).

Press cs REGISTRATION [2].

This displays “Element”.

Press the [6] (ENTER) bm number key.

This displays “Sure?”

Press bn [+] (YES) to execute the clear

operation or bn [–] (NO) to cancel.

• This clears all the parts in the selected

accompaniment pattern.

• You cannot clear parts of an intro or an ending.

In the Rhythm Editing Mode, select the part you

want to clear.

• Perform steps 1 to 5 under “To edit an existing rhythm

and save it” (page EN-79).

Press cs REGISTRATION [2].

This displays “Element”.

Use the [1] (V) and [3] (W) bm number keys

to display “Part”, and then press [6] (ENTER).

This displays “Sure?”

Press bn [+] (YES) to execute the clear

operation or bn [–] (NO) to cancel.

• This clears the selected part.

• The operation shown here is performed as the steps of the

procedures below.

– Step 12 under “To create a totally new rhythm and save

it” (page EN-77)

– Step 12 under “To edit an existing rhythm and save it”

(page EN-79)

– Step 8 under “To configure only the mixer settings of an

existing rhythm and save it” (page EN-80)

Press the [7] (WRITE) bm number key.

• If the rhythm you are editing is a user rhythm, the

message “Replace?” will appear here. Press bn [+]

(YES) to replace the original rhythm data with the new

rhythm data. To save the data as a new rhythm, press

bn [–] (NO).

• If there are already the maximum number of allowable

user rhythms stored in memory (CT-X5000: 100,

CT-X3000: 50), the error message “Data Full” will

appear when you press bn [–] (NO) to indicate that

you cannot save the new rhythm.

• The message “Wait...” remains on the display while

the rhythm save operation is being performed. Do not

perform any operation while this message is on the

display. “Complete” appears on the display after the

operation is complete.

To exit the Rhythm Editing Mode, long-press

the [4] (EXIT) bm number key.

• If you did not perform any editing after executing the

operation in step 1, the Rhythm Editing Mode will be

exited and the [EDIT] indicator will disappear from the

display.

• If you performed any editing after executing the

operation in step 1, the message “Exit?” will be

displayed here. Perform one of the operations below.

To batch clear the recorded data in all parts

included in a single accompaniment pattern

To clear the recorded data in a particular part

included in a single accompaniment pattern

To save a user rhythm

To do this: Perform this operation:

Continue editing

without exiting the

Rhythm Editing Mode

Press bn [–] (NO).

Save edited data and

exit the Rhythm Editing

Mode

(1) Press bn [+] (YES).

(2) When “Write?” appears on the

display, press bn [+] (YES)

again.

Discard edited data

and exit the Rhythm

Editing Mode

(1) Press bn [+] (YES).

(2) When “Write?” appears on the

display, press bn [–] (NO).

CTX5000_3000_EN.book 85 ページ２０１８年２月２６日　月曜日　午後３時５６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X5000 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio CT-X5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info