Bedienungsanleitung Casio CT-X9000IN (Seite 31 von 147) (Englisch)

723292

Zoom out

Zoom in

Vorherige Seite

1/147

Nächste Seite

Controlling Sounds

EN-30

Connect a pedal to the fp PEDAL2/

EXPRESSION jack.

Press bk FUNCTION.

Use the [1] (V) and [3] (W) bm number keys

to display “Cntrller”, and then press [6]

(ENTER).

Use the [1] (V) and [3] (W) keys to display

“Pedal”, and then press [6] (ENTER).

Use the [1] (V) and [3] (W) keys to display

“Pd2 Type”.

Use bn [–] and [+] or the bl dial to change the

setting value.

* For details, see “Connectable Expression Pedals” (page

EN-31).

• If a pedal does not work correctly after configuring

settings, it could mean that the connected pedal is not

compatible with the “Pd2 Type” setting above. Try

changing the “Pd2 Type” to a different setting and see

if this results in correct operation.

Depending on the selected pedal type, perform

one of the operations below.

Y Foot Switch Pedal

Select the pedal effect.

(1) Use the [1] (V) and [3] (W) bm number keys to

display “Pd2Efect”.

(2) Use bn [–] and [+] or the bl dial to change the

setting value.

• For details about pedal effects that correspond to

each setting value, see the “Pedal Function List”

(page EN-31).

Y Expression Pedal

Selecting “2 ExpType1” or “3 ExpType2” in step 6 of this

procedure automatically causes “5 Exp.” (Expression) to

be selected for “Pd2Efect”. If you connect an expression

pedal to the fp PEDAL2/EXPRESSION jack, use the

procedure below to calibrate the pedal before using it.

(1) Use the [1] (V) and [3] (W) bm number keys to

display “ExPCalib”, and then press [6] (ENTER).

This displays “Sure?”

(2) Press bn [+] (YES) to start adjustment or bn [–] (NO)

to cancel the adjustment operation.

(3) While “Highest” is displayed, depress the pedal and

press [6] (ENTER).

(4) While “Lowest” is displayed, release the pedal and

press [6] (ENTER).

• The message “Complete” will appear when the

operation is complete.

• To have an expression pedal connected to the

fp PEDAL2/EXPRESSION jack perform the

same operation (sustain, etc.) as a foot switch

pedal, perform the operation under “■ Foot Switch

Pedal” above to select a pedal effect.

Turn pedal effects on or off for each keyboard

part as required.

• Perform step 6 under “To connect a pedal to the

fo PEDAL1 jack” (page EN-29). Note, however, that

you should display “Pd2Enabl” in step (1).

When the setting is the way you want, long-

press the [4] (EXIT) bm number key to exit the

setting screen.

To connect a pedal to the fp PEDAL2/

EXPRESSION jack

To use this type of pedal: Select this setting:

Foot switch pedal 1 Foot Sw

Expression pedal (Type 1 polarity*) 2 ExpType1

Expression pedal (Type 2 polarity*) 3 ExpType2

CT-X9000_8000IN_EN.book 30 ページ２０１８年４月１２日　木曜日　午後１時８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X9000IN Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info