Bedienungsanleitung Casio CT-X9000IN (Seite 33 von 147) (Englisch)

723292

Zoom out

Zoom in

Vorherige Seite

1/147

Nächste Seite

Controlling Sounds

EN-32

Portamento makes it possible to slide smoothly between

notes as is done with string and woodwind instruments.

Press dm PORTAMENTO.

This displays the [PORTAMENTO] indicator.

• While the above indicator is displayed, sequentially

pressing two keyboard keys causes the first pitch to

slide smoothly into the next.

To disable portamento, press

dm PORTAMENTO and confirm that the

[PORTAMENTO] indicator is not displayed.

• You can configure settings for the keyboard tones of each

part that control the speed of the slide between pitches

when dm PORTAMENTO is pressed. Perform the

procedure under “To configure function settings with the

bk FUNCTION button” (page EN-107) and configure the

following setting: Controller (Cntrller) 3 Portamento

(Portamnt) (page EN-108).

You can use the pitch bend wheel to slide the pitch of notes

smoothly upwards and downwards. This capability makes it

possible to reproduce saxophone and electric guitar choking

effects.

While playing a note on the

keyboard, rotate the ek PITCH

BEND wheel on the left of the

keyboard upwards or

downwards.

The amount the note bends depends on

how much you rotate the pitch bend

wheel.

• Do not touch the wheel as you turn on

the keyboard.

• You also can configure pitch bend wheel operation by

specifying the amount of pitch change at maximum rotation

in either direction. Perform the procedure under “To

configure function settings with the bk FUNCTION button”

(page EN-107) and configure the following setting:

Controller (Cntrller) 3 Pitch Bend (PitchBnd) 3 Pitch

Bend Range (Range) (page EN-108).

You can use the dt MODULATION/ASSIGNABLE button

to apply vibrato to notes (default setting). You can also

change the function of the button so it change how DSP

effects are applied to tones.

• The procedure below assumes that the Digital Keyboard is

configured with initial default settings.

Hold down dt MODULATION/ASSIGNABLE.

The button’s indicator lamp remains lit while the button is

depressed.

• Vibrato is applied keyboard plays while the indicator is

lit.

To disable the effect, release the button.

This causes the button’s indicator lamp to go out.

• You can change the intensity of the vibrato effect while the

indicator lamp is lit. Perform the procedure under “To

configure function settings with the bk FUNCTION button”

(page EN-107) and configure the following setting:

Controller (Cntrller) 3 MODULATION/ASSIGNABLE

(Mod/Asgn) 3 Value when modulation is on (ModValue)

(page EN-108).

Sliding Smoothly Between

Pitches (Portamento)

Using the Pitch Bend Wheel

Displayed

CT-X9000IN: dt MODULATION/

ASSIGNABLE button

To apply vibrato to notes

Lit

CT-X9000_8000IN_EN.book 32 ページ２０１８年４月１２日　木曜日　午後１時８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CT-X9000IN Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info