Bedienungsanleitung Casio KL70E (Seite 15 von 25) (Englisch)

506028

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

E-14

To print a stamp tape

1. Input the text you want to print.

2. Press FUNCTION and then 5

(STAMP).

• A mark appears next to the STAMP indicator on the display when mirror print-

ing is turned on.

• If the text you input in step 1 is too long to fit within the maximum length you

specified, an error message (page 21) appears when you press SET.

3. Press SET to print the stamp tape or ESC to abort the print operation and

return to the text input display in step 1.

• After the printing is complete, the Label Printer returns to the input display in

step 1.

4. Cut off the tape and affix it to the optional stamp holder.

• See the instructions that come with the optional stamp holder for information

about how to attach the stamp tape.

Mirror Image Printing

When you specify mirror image for text, it is printed in reverse image. Use mir-

ror image when you plan to print on transparent tape, with the printing on the

inside. When viewed through the transparent tape, the text will appear normal.

You can also use mirror image printing when using iron-on transfer tape to print

iron-on transfers.

Normal

Mirror Image

To turn mirror image printing on and off

1. Press FUNCTION and then 6 (MIRROR).

Printing a Tape

Printing a tape is as easy as pressing the PRINT key.

To print a tape

1. Press the PRINT key to print a tape of the text you have input and laid out.

• To stop a print operation that is in progress, press ESC.

2. After the print operation is complete, press down on the tape cutter button to

cut the tape.

3. Use scissors to trim the tape to the size you want, if necessary.

• After you print a tape, you can peel off its paper

backing and stick the tape onto the object you

want. Note that the tape will not stick on coarse,

wet, oily, or soiled surfaces. Also, you should not

try to use the tape where it is exposed to direct

sunlight or rain. Do not stick the tape onto hu-

man skin.

• An easy way to remove the backing from a tape

and expose the adhesive surface is to bend the

tape near one of its ends. This should cause the

tape and its backing to separate, allowing you to

pull them apart.

Stamp Printing

The stamp printing feature lets you print on special stamp tape. You can then

attach the finished stamp tape to an optionally available stamp holder to create

your own original pre-inked stamps. The following is the type of stamp holder

currently available for use with stamp tapes.

Note the following important points about stamp printing.

• Stamp printing prints text in mirror image.

• Stamp printing is impossible while 6mm is specified as the tape width.

• An error message (ERR!) appears on the display and the Label Printer refuses

to print whenever you try to print text that is longer than the maximum length

you specify.

OFF

Type

ST-15

Example

8.9cm

5.5cm

Maximum Stamp Size

5.5cm

Tape

Backing

PRN?

STAMP

MIRROR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL70E Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL70E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info