Bedienungsanleitung Casio KL70E (Seite 16 von 25) (Englisch)

506028

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

E-15

Print Density

The print density setting controls how darkly figures are printed on your tapes.

To adjust the print density

1. Press FUNCTION and then 8 (DENSITY).

2. Use H and J to move the underlining to the density setting that you want.

• The lightest setting is 1, while the darkest setting is 5. The standard setting is 3.

• Only four of the five settings that are available can appear on the display. The

display scrolls left and right when necessary to show all of the available settings.

3. When the density setting is the way you want it, press SET to register it.

Part 7 Memory

This part of the manual tells you how to store text data in memory for instant

recall when you need it. You can store two blocks of text in memory, each con-

taining up of 63 characters, for a total of 126 characters.

Important!

• All data stored in memory is deleted whenever batteries go dead and when

you replace batteries. Be sure to keep written backup copies of all important

data (text and documents).

• When using the optional AC adaptor, never disconnect the adaptor while bat-

teries are not loaded in the Label Printer or when batteries are dead. Doing

so causes all data stored in memory to be deleted.

To store data

1. Input the text you want to store.

2. Press FUNCTION and then 1 (MEMO).

3. Press L a number of times to change to the

text store prompt.

2. Press H, J, K or L to change the setting shown on the display between

ON (mirror printing) and OFF (normal).

3. When the mirror image printing setting is the way you want it, press SET to

• A mark appears next to the MIRROR indicator on the display when mirror

printing is turned on.

• After you turn printing on, input text and perform the print operation as you

normally do (page 14) to produce mirror image tapes.

Other Printing Features and Operations

The following are other operations and settings that you may need to use when

printing.

Auto Feed

You can turn the Label Printer’s auto feed feature on and off. When auto feed is

on, the Label Printer automatically feeds the tape about 17.1mm at the begin-

ning and end of each print operation. This creates identical margins on both

sides of your text.

Important!

• After you finish printing when using manual feed, be sure to always press

FUNCTION and then PRINT (FEED) to feed the tape before cutting it. If you

don’t you will cut off part of the printed text.

To turn auto feed on and off

1. Press FUNCTION and then 7 (M-FEED).

2. Press H, J, K or L to change the setting shown on the display between

YES (manual feed) and NO (auto feed).

3. When the feed setting is the way you want it, press SET to register it.

To manually feed tape

Press FUNCTION and then PRINT (FEED) to feed the tape 18.1mm.

1234

STR?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL70E Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL70E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info