Bedienungsanleitung Casio KL8200 (Seite 30 von 36) (Englisch)

506039

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

E-29

• Use a tape width of at least 18mm when received data

item character size is increased vertically by a factor of

two.

• None of the following functions can be used with received

data: frames, preset formats, auto sizing, preset layouts,

block operations, proportional character spacing, smooth-

ing, character input settings, character deletion, text stor-

age into memory, text recall from memory.

• The printer returns to the screen in step 4 (the one that

appears after data communication is complete) after print-

ing is complete.

8. After printing is complete, press ESC SET to quit data

communications.

• All received data is cleared from label printer memory when

you quit data communications.

9. Turn the label printer and graphic scientific caluculator

off and disconnect the cable.

Part 14 Reference

This section contains information about the label printer that

you can use as reference when you need it.

Cleaning the Printer Head and Roller

A dirty printer head and roller can result in poor printing

quality. If you have problems with print quality, use the fol-

lowing procedure to clean the printer head and roller.

To clean the printer head and roller

1. Make sure the label printer is turned off.

2. Press the tape cartridge compartment cover release and

open the compartment cover.

3. Remove the tape cartridge.

4. Use a cotton swab dipped in alcohol to clean the printer

head and roller as shown in the illustration.

5. Replace the tape cartridge and close the compartment

cover.

Initial Settings

The following are the initial settings of the label printer when-

ever you turn it power on or reset the unit.

Item Power On Reset

Display Cleared Cleared

Memory Retained Cleared

User Characters Retained Cleared

Calendar Week Start Day Sunday Sunday

Horz/Vert Horizontal Horizontal

Text Alignment Left Left

Justification Justified Justified

Character Spacing Narrow Narrow

Block Length Auto Auto

Mirror Printing Normal Normal

Proportional Spacing On On

Smoothing On On

Block Spacing Narrow Narrow

Auto Feed Long Long

Tape Length Auto Auto

Block Alignment Left Left

Default Font Retained Sans-Serif

Insert/Overwrite Insert Insert

Contrast (32 levels) Retained Level 17

Density (5 levels) Retained Level 3

Sound On On

Language Retained English

cm/inch Retained cm

Initializing the Label Printer

If you experience serious malfunction of the label printer or

if operation fails completely, try performing the following

operation to initialize the printer.

Important! Initializing the label printer deletes all memory

contents. Make sure you have a back-up copy of text stored

in memory if you need it.

To initialize the label printer

1. Turn power off.

2. Holding down the PRINT, ESC, and ON keys, turn power

back on.

?LA

CSE

TES

• This prompt confirms whether or not you want to initialize

the label printer.

3. Press SET to initialize the label printer or ESC to abort

the reset operation.

Format Indicator

The following shows how the brackets on either side of the

format indicator change to indicate various conditions.

[■]: fixed block length (specified by user)

(■]: block text too long for fixed block length, but printing

will be performed by compressing text.

■]: Printed tape length will be longer than specified fixed

length because text will not fit within fixed tape length

even if its size is reduced 50%.

Tape Length Indicator

The following shows how the brackets on either side of the

tape length indicator change to indicate various conditions.

[5.1cm]: fixed tape length specified by user.

5.1cm]: Printing operation cannot be performed.

Printer head Roller

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL8200 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL8200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info