Bedienungsanleitung Casio KL8200 (Seite 32 von 36) (Englisch)

506039

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

E-31

Bar Code Specifications

*1 The check digit is automatically calculated in accordance

with input data. For EAN-13, EAN-8, UPC-A, and ITF,

the check digit is appended at the end of the printed

digits. For CODE39 and CODABAR, the check digit is

appended one digit before the final digit (when a check

digit is used).

*2 UPC-E includes a check digit, but it is not printed as a

numeral below the bar code.

*3 The number of digits printed below a bar code equals

the input characters plus automatically appended char-

acters.

*4 An error message is displayed whenever there are in-

sufficient digits. The unit will not allow input of too many

digits.

*5 An error message appears and printing is impossible if

an odd number of digits are input when an ITF check

digit is not being used. Append a zero to the beginning

of the digits and re-input.

*6 An error message appears and printing is impossible if

an even number of digits are input when an ITF check

digit is being used. Append a zero to the beginning of

the digits and re-input

*7 Both the start code and end stop code of CODE39 must

be asterisks.

*8 An error message appears and printing is impossible if

any characters other than those specified here are used.

*9 With CODABAR, A, B, C, or D can be used as the start

code and stop code. An error message appears and print-

ing is impossible if any other character is used.

Check

Digit *1

Yes

(Yes) *2

Yes

Digits *3

4 to 22

Input Digits

4 to 22 (even only) *5

3 to 21(odd only) *6

2 to 20

1 to 19

4 to 22

3 to 21

Input Characters

Numerals

Alpha-numeric characters; hyphen; period;

space; dollar sign; slash; plus sign; percent

sign

Numerals; hyphen; period; dollar sign; colon;

slash; plus sign; letters A through D (first and

final digits only) *9

Automatically

Assigned

Number of

Digits

—

2 *7

—

Check

Digit

—

Bar Code

Type

EAN-13

EAN-8

UPC-A

UPC-E

ITF

CODE39

CODABAR

Troubleshooting

••

•

Power Supply

••

•

Text Input

Nothing appears on the display.

Possible Cause Action

Improper display con-

trast setting

AC adaptor is not con-

nected correctly.

Adjust display contrast.

Make sure the AC adaptor is

connected correctly.

Cannot input text.

Possible Cause Action

FUNC key has been

pressed.

Press ESC to clear FUNC key

operation.

Tape does not come out when PRINT is pressed.

Possible Cause Action

Tape cartridge com-

partment cover is not

closed completely.

No more tape left in

the cartridge.

Tape jam

Securely close the tape car-

tridge cover.

Replace the tape cartridge with

a new one.

Remove the tape cartridge and

pull out the jammed tape by

hand. Cut off excess tape with

scissors, and carefully replace

the cartridge into the label printer.

Important!

Never allow the tape outlet to

become blocked and never

touch tape as it is being fed

during printing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KL8200 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KL8200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info