Bedienungsanleitung Casio KLC500 (Seite 10 von 52) (Englisch)

506040

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

E-9

4. Check to make sure that the end of the tape is not bent.

• If the end of the tape is bent, use scissors to cut off the bent portion.

5. Make sure that the tape is under the tape guide

and that it is not bent or twisted.

• Make sure the end of the tape is passing through

the tape guide. If it isn’t, pass the end of the tape

through the tape guide as shown in the illustration.

6. Pull out about 3cm (1

") of tape.

• Never try to force tape back into the cartridge

once it is pulled out.

• Do not pull on the tape too hard. Doing so can

break the ink ribbon and result in malfunction.

7. Use a pencil or some other thin object to take

up slack in the ink ribbon as shown in the illus-

tration. Note that the tape does not move at this

time.

• If the ink ribbon is slack when you load it into the

label printer, it can break or cause some other

problem.

• Be sure to turn the ink ribbon take up spool only

in the direction indicated by the arrow (a).

• Turn the spool until the other spool (b) starts turn-

ing in the direction noted by the arrow. This indi-

cates there is no slack in the ribbon.

8. Load the tape cartridge into the label printer,

making sure that the tape and ink ribbon pass

between the head and roller.

• Be sure to lower the tape cartridge straight down

into the label printer, and press down on it until it

clicks securely into place.

9. Close the cover.

10.

Turn on label printer power and press FUNCTION and then PRINT (FEED)

two or three times to make sure that the tape comes out without any problem.

• If the tape does not come out normally, turn off power and start again from

step 1 above.

Ink ribbon

(b)

(a)

11.Making sure that the tape is correctly exiting from the tape outlet, press

FUNCTION and then IMAGE (CUT) to cut the tape.

Removing the tape cartridge

• Grasp the tape cartridge with your fingers, and lift it straight up out of the label

printer.

• To make it easier to remove a narrow (6mm,

9mm) tape cartridge, insert a pencil or some other

thin, pointed object under the right side of the

tape and lift up, as shown in the illustration.

About the SET UP menu

The SET UP menu lets you change various

basic settings quickly and easily. To display the

SET UP menu, press the SET UP key.

Use u and i to move the highlighting to the item you want to select and then

press SET. Press ESC to clear the SET UP menu without selecting anything.

The following sections explain how to use most of the SET UP menu items. See

page E-17 for details on using DEFAULT FONT, page E-16 for how to use

INPUT, page E-29 for COPIES(Multiple Copy Printing), and page E-32 for DEN-

SITY.

Message Language

You can use the following procedure to select any one of five different languages

(English, German, French, Italian, and Spanish) for display of message text.

• All of the display examples in this manual use English as the display

language.

Tape

Tape guide

Printer head

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KLC500 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KLC500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info