Bedienungsanleitung Casio KLC500 (Seite 25 von 52) (Englisch)

506040

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

E-24

Important! You can use preset formats to specify character sizes for lines of

text only when there is no character size specification already made inside of

the text. If you press the SIZE key while the cursor is located inside of a block

that already contains a character size mark, the character size specification

menu appears instead of the menu below (RANGE menu). This means you

cannot use the preset format menu when you have already made a character

size specification in the same block.

To specify character sizes for lines of text using preset

formats

1. While the cursor is located inside of the block

of text where you want to use the preset for-

mats, press SIZE.

• See page E-25 for details about blocks.

2. Use u and i to highlight “LINE” and then

press SET.

• The FORMAT menu appears with all of the

preset formats that are available in accor-

dance with the number of text lines that are

in the block where you located the cursor,

and with the width of the tape loaded in the

label printer (page E-48, E-49).

3. Use u, i, t and y to move the highlighting to the format that you want to

use and then press SET to select it.

• At this point, the label printer returns to the text input screen.

To find out preset format character sizes

Use the t and y cursor keys to move the cursor around the display. The char-

acter size indicator shows the current size setting for the character where the

cursor is located.

Also, the display shows an image of what the block where the cursor is located

will look like when you print it. See page E-32 for more information.

Part 7 FORM Menu Functions

This part of the manual describes how to use the FORM menu to layout your

text exactly the way you want it on the label. With the FORM menu, you can

control character pitch, text blocks, text alignment, and a wide range of other

features.

Fundamentals of Label Layout

Before we actually begin our discussion about how to layout a tape, we should

first define a few terms. Note the following.

Blocks

A block is text that is enclosed between two block marks ( ). Note that the first

(far left) block does not require a block mark at the beginning, and the last (far

right) block does not require a block mark at the end. If there are no block marks,

all of the text is treated as a single block. You can individually specify the length of

each block, as well as the pitch and the number of lines of inside each block.

Print Area

The print area is the actual area of a label that contains printed text. It starts with

the left side of the first character printed, and ends with right side of the last

character printed.

Side Spaces

The side spaces are blank areas that the label printer automatically adds on

either end of the print area. Note that both of the side spaces are added when

you are using auto feed, and they are not added when using manual feed.

Manual Feed (no side spaces),

Auto Feed (with side spaces) Multiple copy printing

Tape Length

The tape length is the print area, plus the side spaces.

Settings you make for side spaces, block spacing, and mirror printing affect the

entire label length.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KLC500 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KLC500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info