Bedienungsanleitung Casio KLC500 (Seite 26 von 52) (Englisch)

506040

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

E-25

Using the Layout Display

You can check the layout of your label at any time using the layout display. The

layout display shows all of the graphics and text elements that make up your

label to give you a general idea of how the label is laid out.

To show the layout display

1. After laying out the label you plan to print,

press LAYOUT.

2. If the label layout is too big to fit on a single display, use u and i to scroll it.

• Pressing u returns to the top of the layout.

3. Press ESC to quit the layout display.

• You can view the actual appearance of the label using the image display,

which is described on page E-32.

Creating and Deleting Blocks

The following procedures describe how to create and delete blocks. Later you

will learn how you can change certain settings on a block-by-block basis.

To create a block

Example: To input the text “ABXYZ Computer Company” and create two blocks:

“ABXYZ” and “Computer Company”.

1. Input the text.

2. Move the cursor to the space between “ABXYZ” and “Computer Company”.

3. Press BLOCK.

• If you wanted to break the text up into three

blocks, you should input another block mark.

Feed setting (E-30)

Screen number

(when the entire layout does

not fit on a single screen)

To delete a block mark

To delete a block mark, use the procedures for DEL as described under

“Deleting Individual Characters” (page E-15).

You cannot use BS for deleting block marks.

Important!

• You can input up to 15 block marks into a single passage of text.

• When your passage of text consists of a single block (when it contains no ),

pressing the FORM key displays BLOCK FORMAT menu 1/4 through 4/4,

followed by OVERALL FORMAT menu 1/6 through 6/6. Make the settings

you want as each of these screens appears.

• When your passage of text consists of multiple blocks (when it contains at

least one ), pressing the FORM key displays the FORM menu. Select BLOCK

FORMAT, and then ONE BLOCK or ALL BLOCKS in the RANGE setting screen

to display BLOCK FORMAT menu 1/4 through 4/4, or OVERALL FORMAT to

display OVERALL FORMAT menu 1/6 through 6/6.

Block Operations

The procedures in this section can be used to control the following parameters

for each block.

• Direction (horizontal, vertical)

• Alignment (left, equal justify, equal ragged, center, right)

• Character pitch (

character)

• Block length (auto, fixed)

Use the BLOCK FORMAT menu to perform block operations.

To display the BLOCK FORMAT menu

1. While there is text on the display, press

FORM.

• This menu appears only when the passage

of text consists of multiple blocks (when it

contains at least one ).

2. Use u and i to move the highlighting to

“BLOCK FORMAT” and then press SET.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio KLC500 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio KLC500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info