Bedienungsanleitung Casio PL-40R (Seite 21 von 34) (Englisch)

466869

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

E-19

Basic Operations

The term polyphony refers to the maximum number of notes

you can play at the same time. This piano has 64-note

polyphony, which includes the notes you play as well as the

rhythms and auto-accompaniment patterns that are played

by the piano. This means that when a rhythm or auto-

accompaniment pattern is being played by the piano, the

number of notes (polyphony) available for keyboard play is

reduced. Also note that some of the tones provide only 32-

note polyphony.

A number of the tones that are available with this piano have

been recorded and processed using a technique called digital

sampling. To ensure a high level of tonal quality, samples are

taken in the low, mid, and high ranges and then combined to

provide you with sounds that are amazingly close to the

originals. You may notice very slight differences in volume or

sound quality for some tones when you play them at different

positions on the keyboard. This is an unavoidable result of

multiple sampling, and it is not a sign of malfunction.

This piano lets you use up to four parts simultaneously for

your performances. The parts are named Upper1, Upper2,

Lower1, and Lower2, and the display shows the tone

currently assigned to each.

You can use the PART/(MIXER) button to display the tones

that are assigned for each part (Upper1, Upper2, Lower1,

Lower2). Each press of PART/(MIXER) button cycles through

the parts in the sequence shown below. While a part is

displayed, you can change the tone assigned to it (page E-18).

With layer you can assign two different tones (a main tone

and a layered tone) to the keyboard, both of which play

whenever you press a key.

1. Select the main tone.

2. Press the LAYER/(GROUP A/B) button to turn

on tone layering.

This causes the indicator lamp of the button to

light.

The currently layered tone name appears on the

display. You can use the TONE buttons to change

the layered tone if you want.

3. Select the layered tone.

4. Now try playing something on the keyboard.

Both tones are played at the same time.

5. Press the LAYER/(GROUP A/B) button again to

unlayer the tones and return the keyboard to

normal.

This causes the indicator lamp of the button to go

out.

Layering is disabled during demo tune play and in the

Music Library Mode (while Music Library Mode lamp is lit).

Layering is achieved by sounding Upper1 and Upper2 of

mixer Group A. This means you can use the mixer to

change the volume balance and stereo pan position

parameters for both the main tone and layered tone. See

“Using the Mixer” on page E-46 for details.

Polyphony

Digital Sampling

Upper1, Upper2, Lower1,

Lower2

Upper1

Upper2

Lower1

Lower2

Using Layer

To layer two tones

426-E-021A

PL40NE01-1.book 19 ページ２００２年７月２３日　火曜日　午後６時５２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PL-40R Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PL-40R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info